Abstract:The investigation delved into the dielectric properties of Methylammonium Lead Iodide (MAPbI3) nanoparticles (NPs) and MAPbI3@rGO nanocomposites (NCs) across varying concentrations of rGO.The co-precipitation approach was used to synthesize a reduced graphene oxide (rGO)-doped MAPbI3 nanocomposite with varying rGO doping concentrations. Regarding potential uses in the material sectors, the nano-composite demonstrated intriguing and unique dielectric behaviour at certain rGO loadings. Temperature ranges (25–60°C), doping concentrations (at 0.5wt%, 1wt%, 5wt%, and 7wt%), and frequency ranges (10Hz–4MHz) (for permittivity and dielectric loss) were all adjusted in order to fully examine the dielectric characteristics. The dielectric response study indicates the significant enhancement of the relative permittivity of MAPbI3 in the presence of rGO (~500 times). The presence of many interfaces, ion migration, polar group reorientation and formation of nanocapacitor inside the MAPbI3@rGO composites are the causes of this significant enhancement in dielectric permittivity. As the temperature increases, the effective dipolar polarization of the composites increases, which in turn helps enhance relative permittivity. Nevertheless, at 60°C and 10Hz, the relative permittivity value for MAPbI3@rGO composites reaches nearly 2.8×106 (2000 times), the highest reported MAPbI3 composites to date. The composite material exhibited remarkable potential as a supercapacitor dielectric material, as evidenced by dielectric constant increases of up to 105 orders of magnitude following rGO injection. Moreover, the ac conductivity for MAPbI3@rGO is higher than pristine MAPbI3, possibly due to more charge conduction from the valence band to the conduction band for MAPbI3@rGO. The conductivity is also increased as a function of temperatures for all composites due to the decrement of electronic resistance. The dielectric loss value exhibits a downward trend (decreased by ~6 times), and the repair of the sp2 network in the graphene sheet is approved by the higher ac conductivity in MAPbI3@rGO NCs relative to MAPbI3 NPs. Furthermore, the NTCR behaviour enhances its potential as a superior material for energy storage applications. The overall forecasts indicate MAPbI3 augmented with rGOto be a potential candidate for energy storage capacitive devices in the electronic industry.

Graphene based PANI/MnO2 nanocomposites with enhanced dielectric properties for high energy density materials

Fabrication of a novel PANI/[Co(NH3)4(C3H4N2)2]Cl3 nanocomposite with enhanced dielectric constant and ac-conductivity

Fabrication and dielectric properties of advanced high permittivity polyaniline/poly(vinylidene fluoride) nanohybrid films with high energy storage density

BN-PVDF/rGO-PVDF Laminate Nanocomposites for Energy Storage Applications

Highly Thermally Conductive Dielectric Nanocomposites with Synergistic Alignments of Graphene and Boron Nitride Nanosheets

Polyimide nanocomposites for high‐temperature capacitive energy storage applications by incorporating functional graphene oxide nanosheets: Design, preparation, and mechanism

Unique stabilizing effects of molybdenum disulfide and graphene oxide dual dopants toward polyaniline’s energy storage behavior

Graphene Oxide-Encapsulated Carbon Nanotube Hybrids for High Dielectric Performance Nanocomposites with Enhanced Energy Storage Density.

Fabrication of Two-Dimensional Hybrid Sheets by Decorating Insulating Pani on Reduced Graphene Oxide for Polymer Nanocomposites with Low Dielectric Loss and High Dielectric Constant

High Discharge Energy Density in Rationally Designed Graphene Oxide@zinc Oxide/polymer Blend-Polyetherimide Heterostructured Bilayer Nanocomposites

Morphological Modulation of Conducting Polymer Nanocomposites with Nickel Cobaltite/Reduced Graphene Oxide and Their Subtle Effects on the Capacitive Behaviors

Pure MnO2, Ni/MnO2, Ni/MnO2@PVA and Ni/MnO2@PVP polymetrix nanocomposites for energy storage device

High Conduction Band Inorganic Layers for Distinct Enhancement of Electrical Energy Storage in Polymer Nanocomposites

Reduced Polyaniline-Modified NaNbO3 Nanowire/Polyetherimide Nanocomposites for Dielectric Capacitors with Enhanced Dielectric Properties and High Thermal Stability

All-organic Hybrid Composite Film with High Energy Density

Nanoarchitecture of PANI/CNT/GO hybrid nanocomposites with enhanced dielectric and gas sensing properties

High electrochemical capacity of novel ternary graphene oxide based PANI/Co 3 O 4 nanocomposite as supercapacitor electrode material

Facile synthesis and electrochemical study of a ternary hybrid PANI/GNP/MnO2 as supercapacitor electrode material

Carbon-based hierarchical mesoporous polyaniline/montmorillonite nanocomposites for high energy density supercapacitors

Significantly improved breakdown strength and energy density of tri-layered polymer nanocomposites with optimized graphene oxide

Boosting Dielectric and Electrical Performance of Perovskite Material by Collaborative Augmentation with Reduced Graphene Oxide Nanosheets for Cutting-edge Storage Solutions