Abstract:One of the main challenges for the treatment of oily wastewater is emulsion separation. However, emulsions are generally more stable and difficult to separate. Herein, we report a facile strategy for the fabrication of monolithic oil/water separation materials by modifying melamine sponge with magnesium hydroxide (MH) coating, which can effectively separate immiscible oil/water mixtures and surfactant-stabilized emulsions. Its demulsification efficiency for the surfactant-stabilized emulsions can exceed 99.7%. In particular, the separation flux in a continuous emulsion separation system driven by a low-power pump can reach as high as 6.7 × 104 L m–2 h–1. MH particles coated on the surface of the sponge is one of the key factors for the formation of superhydrophobic surfaces and provide abundant adsorption sites for oil. Moreover, it was found that the surfactant added during the MH synthesis process not only affects the surface charge of MH but also interacts with the surfactant in the emulsion, which can promote instability and breaking of the oil/water interfacial film of emulsion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c01276?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c01276</a>.Physical properties of the as-prepared samples (Table S1); schematic diagram of S-MH preparation (Figure S1); XRD patterns of as-prepared S-MH (Figure S2); FT-IR spectra of MH, SDBS, and S-MH (Figure S3); N2 adsorption–desorption isotherms and pore size distribution of S-MH (Figure S4); TEM images of (a) S-MH, (b) C-MH, and (c) MH (Figure S5); Effect of S-MH suspension concentration on water contact angle and sliding angle of S-MH/MS. (Figure S6); Effect of S-MH content in solution during synthesis on water contact angle of S-MH/MS S-MH/MS (Figure S7); separation of nonturbulent oil/water mixture and separation of turbulent oil/water mixture (Figure S8); photographs showing the preparation of emulsion (Figure S9); photographs showing the oil/water separation device (Figure S10); photographs showing the stability of surfactant-free emulsion (SF-E), CTAB-stabilized emulsion (CS-E) and SDS-stabilized emulsion (SS-E) (Figure S11); optical micrograph of surfactant-free emulsion (SF-E) and SDS-stabilized emulsion (SS-E) and histogram of the oil droplet size distribution in case of SF-E and SS-E (Figure S12); micrograph of the filtrate obtained by S-MH/MS separating SS-E and the particle distribution (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_001.pdf">PDF</a>)Process of S-MH/MS separating emulsion (CS-E) driven by gravity (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_002.mp4">MP4</a>)Process of S-MH/MS separating emulsion driven by peristaltic pump (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_003.mp4">MP4</a>)This article has not yet been cited by other publications.

Mussel-Inspired Ag NPs Immobilized on Melamine Sponge for Reduction of 4-Nitrophenol, Antibacterial Applications and Its Superhydrophobic Derivative for Oil–Water Separation

Designing MOFs/CuCo-LDHs Hybrid-Based Superhydrophobic Sponge for Speedy Eliminating Microplastics, Dyes, and Oils from High-Salinity Water

Mussel-inspired Ag Nanoparticles Anchored Sponge for Oil/water Separation and Contaminants Catalytic Reduction

Nanoparticle-decorated and poly(dimethyl siloxane)-modified superhydrophobic melamine sponge for efficient oil/water separation

Preparation and properties of a silver particle-coated and 1-dodecanethiol-modified superhydrophobic melamine sponge for oil/water separation

High throughput, antibacterial and nonflammable melamine sponges for oil/water separation

An environmentally friendly and superhydrophobic melamine sponge self-roughened by in-situ controllably grown polydopamine nanoparticle for efficient oil-water separation

Mussel-Inspired Immobilization of Photocatalysts with Synergistic Photocatalytic-Photothermal Performance for Water Remediation

Superhydrophobic melamine sponges with high performance in oil/organic solvent sorption

Enhanced Oil/water Separation Using Superhydrophobic Nano SiO2-modified Porous Melamine Sponges.

Facile construction of superhydrophobic/superoleophilic melamine sponges with durability and antifouling for selective oil absorption and effective oil/water separation

Efficient Removal and Recovery of Ag from Wastewater Using Charged Polystyrene-Polydopamine Nanocoatings and Their Sustainable Catalytic Application in 4-Nitrophenol Reduction

Ultrastable superhydrophobic melamine sponge via a one-step aqueous solution-based approach for oil/water separation

Engineering green MOF-based superhydrophobic sponge for efficiently synchronous removal of microplastics and pesticides from high-salinity water

Converting pomelo peel biowaste into multifunctional sponges integrated underwater superoleophobicity and catalytic ability for sewage treatment

3D Superhydrophobic Sponge Coated with Magnesium Hydroxide for Effective Oil/Water Mixture and Emulsion Separation

Durable multifunctional superhydrophobic sponge for oil/water separation and adsorption of volatile organic compounds

Facile Preparation of Photothermal Superhydrophobic Melamine Sponge Decorated with MXene and Lignin Particles for Efficient Oil/Water Separation, Fast Crude Oil Recovery, and Active Deicing

Non-fluorinated lignin-based melamine sponges with superhydrophobic and photothermal properties for multi-functional applications

Superhydrophobic Melamine–Formaldehyde Sponge Functionalized by Coupling Agent–Isocyanate Siloxane as Efficient Absorbents for Oil and Organic Solvents

AgNPs/lignin-aminated polyol/polyvinyl alcohol sponges as efficient recyclable catalysts for organic pollutants degradation