Abstract:While significant work is being carried out to develop materials for enabling high surface charge density triboelectric nanogenerators (TENG), little attention has been paid to the role of electrodes responsible for charge collection. This work reports on the facile synthesis and use of high crystallinity, sp(2)-hybridised laser-induced graphene (LIG) as a high-efficiency electrode for triboelectric nanogenerators (TENGs). Using a conventional 10.6 mu m CO2 laser, the controlled, direct photothermal conversion of dielectric, tribo-negative polyimide (PI) and tribo-positive cellulosic paper into corresponding PI-LIG and paper-LIG, respectively, facilitates a significantly higher electrical output as compared to the commonly utilised adhesive aluminium electrodes. The LIG based paper-PI TENGs showed significantly higher electrical output characteristics with a peak-to-peak voltage of up to-625 V, a current density of-20 mA m(-2) and a transferred charge density of-138 mu Cm-2 with a maximum power output of-2.25 W m(-2), respectively, while the corresponding values for the conventional Al-tape electrode-based paper-PI TENGs were 400 Vp-p, similar to 10 mA m(-2), similar to 85 mu C m(-2) and 0.9 W m(-2), respectively. The mechanically robust LIG electrodes show excellent stability with less than 5.0% variation in output over 12,000 contact cycles. Using Kelvin probe force microscopy (KPFM) measurements, we have measured differences in not only the average surface potentials of the triboelectric surfaces (-0.26 V for pristine PI vs. +0.34 V for paper, which drive the TENG electrical output) but also for the LIG's synthesised from them (-0.08 V for PI-LIG vs. +0.26 V for paper-LIG), suggestive of the role of initial surface chemistry in the formation of LIGs. The enhanced (similar to 150%) power density for LIG based TENGs is ascribed to the lowering of the charge transfer barrier height via the alignment of Fermi levels resulting in higher surface charge on the dielectric surface and the significantly (similar to 6 orders) lower interfacial contact impedance of LIG as compared to adhesive aluminium electrodes. Thus, via the removal of the additional interface between the triboelectric surface and electrode, high-performance metal-free TENGs with excellent prospects for enabling energy harvesting applications can be realised.

High-performance triboelectric nanogenerators with laser-induced graphene pattern for efficient charge transfer

Enhancement of Patterned Triboelectric Output Performance by an Interfacial Polymer Layer for Energy Harvesting Application

Enhancement of Triboelectric Nanogenerator Output Performance by Laser 3D-Surface Pattern Method for Energy Harvesting Application

Integrated and Shape-Adaptable Multifunctional Flexible Triboelectric Nanogenerators Using Coaxial Direct Ink Writing 3D Printing

Structure‐Foldable and Performance‐Tailorable PI Paper‐Based Triboelectric Nanogenerators Processed and Controlled by Laser‐Induced Graphene

Replacing the Metal Electrodes in Triboelectric Nanogenerators: High-performance Laser-Induced Graphene Electrodes

Compositional Engineering of Hybrid Organic-Inorganic Lead-Halide Perovskite and PVDF-Graphene for High-Performance Triboelectric Nanogenerators

Conductive Interlayer Modulated Ferroelectric Nanocomposites for High Performance Triboelectric Nanogenerator

High Performance Triboelectric Nanogenerators with Aligned Carbon Nanotubes.

Ultra-high output triboelectric nanogenerator based on synergies of material modification and charge pumping

Enhancing Performance of Composite-Based Triboelectric Nanogenerators Through Laser Surface Patterning and Graphite Coating for Sustainable Energy Solutions

Effective Interfacial Energy Band Engineering Strategy Toward High-Performance Triboelectric Nanogenerator

Charge-trapping-blocking layer for enhanced triboelectric nanogenerators

Some measures to enhance the energy output performances of triboelectric nanogenerators

In-situ amino-functionalized and reduced graphene oxide/polyimide composite films for high-performance triboelectric nanogenerator

Recent Advances in Fabricating High-Performance Triboelectric Nanogenerators via Modulating Surface Charge Density

High-performance Triboelectric Nanogenerator Based on Electrospun PVDF-graphene Nanosheet Composite Nanofibers for Energy Harvesting

High-Performance Triboelectric Nanogenerator Powered Flexible Electroluminescence Devices Based on Patterned Laser-Induced Copper Electrodes for Visualized Information Interaction

Dielectric Modulated Cellulose Paper/PDMS‐Based Triboelectric Nanogenerators for Wireless Transmission and Electropolymerization Applications

Enhanced Triboelectric Output of PDMS-based Composite Film with Bi-Material Filling and Surface Patterning

Enhancing the Output Performance of a Triboelectric Nanogenerator Based on Modified Polyimide and Sandwich-Structured Nanocomposite Film