Abstract:Abstract Objectives/Scope Coalbed methane (CBM) has become an important source of clean energy in the recent decades worldwide including the US, China, Australia, India and Russia with more than 60 countries having different degrees of promising coal reserves. CBM reservoirs are distinguished from conventional reservoirs due to the major difference in the mechanism of gas storage and production of water. In CBM reservoirs, pores act as the major storage mechanism as gas is trapped and stored there and produced by means of dewatering and thus lowering the reservoir pressure. Free gas forms as the pressure is lowered leading to increased gas permeability of coal and thus increasing recovery. Microbial activity and thermal maturation of organic compounds are the main mechanisms of methane generation in lower-and-higher rank coals, respectively. Even though methane is an abundant and clean energy source, there are certain operational, technical and economic challenges involved in its production due its unique nature outlined above. Thus, a strong understanding of the parameters and uncertainties that influence the recovery is crucial. Methods, Procedures, Process Due to the fact that the organic materials that make up coals generally have a stronger affinity for CO2 than for methane, CO2 is used as an enhanced recovery method to displace methane as an enhanced coalbed methane recovery (ECBM) method. While there is no current comprehensive optimization study on the effects of such factors, ECBM has a very significant role in the future of energy as it means more energy out of natural gas while eliminating the adverse effects of greenhouse gases. Results, Observations, Conclusions In this study, a standard SPE reservoir simulation model is used to study the factors influencing the recovery in coal bed methane reservoirs by investigating the significance of parameters including but not limited to porosity, adsorption capacity, fracture permeability along with coal density and irreducible water saturation. Novel/Additive Information The optimization results obtained by means of coupling a full-physics commercial numerical reservoir simulator with an optimization/uncertainty tool are presented outlining the different degrees of significance of these factors on production and ultimate recovery for better understanding of the phenomenon that will lead to more robust reservoir management decisions.

Real-time monitoring of coalbed methane production network following liquid CO 2 injection in a low-efficiency well network: Response to gas and water production characteristics

Numerical study on CO2 sequestration in low-permeability coal reservoirs to enhance CH4 recovery: Gas driving water and staged inhibition on CH4 output

Effects of CO 2 injection pressure and confining pressure on CO 2 -enhanced coalbed methane recovery: Experimental observations at various simulated geological conditions

Optimization of Enhanced Coalbed Methane Recovery with C02 Injection

A small-scale experimental study of CO2 enhanced injectivity methods of the high-rank coal

Laboratory experiments of CO2-enhanced coalbed methane recovery considering CO2 sequestration in a coal seam

Effective means to alleviate the greenhouse effect: case study of history match simulations on a brief CO2 injection into less-deep low-rank coal seams

Numerical simulation of CO2-ECBM for deep coal reservoir with strong stress sensitivity

Experimental and numerical model of anisotropic permeability and CO2 injectivity of coal during CO2 enhanced coalbed methane recovery process

Study of CO2 injection to enhance gas hydrate production in multilateral wells

Numerical Simulation of the Effect of Injected CO2 Temperature and Pressure on CO2-Enhanced Coalbed Methane

Analysis of CO2 phase transition within well-bore during injection into low-rank but relatively shallow coal seams

Experimental study on the desorption behavior of high-volatile bituminous coals following CO 2 and CH 4 injection at various compositional ratios

Co-production of Tight Gas and Coalbed Methane from Single Wellbore: a Simulation Study from Northeastern Ordos Basin, China

Optimal injection timing and gas mixture proportion for enhancing coalbed methane recovery

Effects of Injection Pressure and Duration on Alternate High-Pressure Water-Gas Sequestration of Coalbed Methane

Coupled adsorption-hydro-thermo-mechanical-chemical modeling for CO2 sequestration and well production during CO2-ECBM

A study on the carbon dioxide injection into coal seam aiming at enhancing coal bed methane (ECBM) recovery

Analysis of the Key Factors Affecting the Productivity of Coalbed Methane Wells: A Case Study of a High-Rank Coal Reservoir in the Central and Southern Qinshui Basin, China

Experimental Investigation of Reservoir Fluid Interlayer Crossflow Through Fracture During the Drainage Stage of Coal Measure Gas Well

Production characteristics and influencing factors of coalbed methane wells: a case study of the high-ranking coal seam in the southeastern Qinshui Basin, China