Abstract:We present a numerical scheme valid in the range of highly to weakly compressible flows using a single-fluid four equation approach together with multi-component thermodynamic models. The approach can easily be included into existing finite volume methods on compact stencils and enables handling of compressibility of all involved phases including surface tension, cavitation and viscous effects. The mass fraction (indicator function) is sharpened in the two-phase interface region using the algebraic interface sharpening technique Tangent of Hyperbola for INterface Capturing (THINC). The cell face reconstruction procedure for mass fractions switches between an upwind-biased and a THINC-based scheme, along with proper slope limiters and a suitable compression coefficient, respectively. For additional sub-grid turbulence modeling, a fourth order central scheme is included into the switching process, along with a modified discontinuity sensor. The proposed “All-Mach” Riemann solver consistently merges the thermodynamic relationship of the components into the reconstructed thermodynamic variables (like density, internal energy), wherefore we call them All-Mach THINC-based Thermodynamic-Dependent Update (All-Mach THINC-TDU) method. Both, liquid-gas and liquid-vapor interfaces can be sharpened. Surface tension effects are taken into account by using a Continuum Surface Force (CSF) model. In order to reduce spurious oscillations at interfaces we decouple the computation of the interface curvature from the computation of the gradient of the Heaviside function. An explicit, four stage low storage Runge-Kutta method is used for time integration. The proposed methodology is validated against a series of reference cases, such as bubble oscillation/advection/deformation, shock-bubble interaction, a vapor/gas bubble collapse and a multi-component shear flow. The results of a near-critical shock/droplet interaction case are superior to those obtained by WENO3 and OWENO3 schemes and support that the proposed methodology works well with various thermodynamic relations, like the Peng-Robinson equation of state. Finally, the approach is applied to simulate the three-dimensional primary break-up of a turbulent diesel jet in a nitrogen/methane mixture including surface tension effects under typical dual-fuel conditions. The obtained results demonstrate that the methodology enables robust and accurate simulations of compressible multi-phase/multi-component flows on compact computational stencils without excessive spurious oscillations or significant numerical diffusion/dissipation.

Three-component volume of fluid method coupling with interface compression method and Eulerian–Lagrangian spray atomization surface density model for prediction of cavitating sprays

Three-Dimensional Simulation Of Effervescent Atomization Spray

Eulerian–Lagrangian modeling of spray G atomization with focus on vortex evolution and its interaction with cavitation

Numerical Models For Viscoelastic Liquid Atomization Spray

Simulation of Droplet-gas Flow in the Effervescent Atomization Spray with an Impinging Plate

Large-Eddy Simulation of ECN Spray A: Sensitivity Study on Modeling Assumptions

Improved Methods for Mixing-Limited Spray Modeling

Large eddy simulations of reacting and non-reacting transcritical fuel sprays using multiphase thermodynamics

Direct numerical simulation of three-dimensional swirling n-heptane spray flames

Modeling the Dense Spray Regime Using an Euler-Lagrange Approach With Volumetric Displacement Effects

Investigation of Effect of Nozzle Geometry on Spray Characteristics with a 3D Eulerian Spray Model Coupled with the Nozzle Cavitating Flow

Numerical Investigation on Transient Internal Cavitating Flow and Spray Characteristics in a Single-Hole Diesel Injector Nozzle: A 3D Method for Cavitation-Induced Primary Break-Up

A Mixed Primary Atomization Model with Quantification of Aerodynamic, Turbulence and Cavitation Effects

Segment-based Eulerian-Lagrangian transition method for flat nozzle spray atomization simulation

Numerical Simulation of the Micro-Jet Velocity and Cavitation-Erosion on an Axisymmetric Nozzle

Real-fluid injection modeling and LES simulation of the ECN Spray A injector using a fully compressible two-phase flow approach

An all-Mach consistent numerical scheme for simulation of compressible multi-component fluids including surface tension, cavitation, turbulence modeling and interface sharpening on compact stencils

Application and assessment of the Improved Delayed Detached Eddy Simulation model to the cold spray process: towards high fidelity Computational Fluid Dynamics simulations

Application of Central-Weighted Essentially Non-Oscillatory Finite-Volume Interface-Capturing Schemes for Modeling Cavitation Induced by an Underwater Explosion

Volumetric Displacement Effects of Dispersed Phase on the Euler-Lagrange Prediction of a Dense Spray

CFD unified approach under Eulerian-Lagrangian framework for methanol and gasoline direct injection sprays in evaporative and flash boiling conditions