Enhanced hydrogen production coupled with ethanol electrocatalytic oxidation by flow-through self-supporting electrode

Jiaojiao Chen,Yu Chen,Mingxia Yang,Lei Deng,Zeyi Xiao,Senqing Fan
DOI: https://doi.org/10.1016/j.fuel.2023.129441
IF: 7.4
2023-08-09
Fuel
Abstract:Electrocatalytic oxidation of ethanol to value-added production is an ideal replacement of the conventional anodic oxygen evolution reaction (OER) for efficient hydrogen (H 2 ) production due to the lower electric potential energy and higher safety. However, the sluggish mass transfer rate of reactants commonly is the crucial limitation of electrocatalytic oxidation efficiency. Here, Ni(OH) 2 nanosheet is immobilized on nickel foam (NF) to fabricate a flow-through self-supporting electrode (Ni(OH) 2 /NF) served as anode for ethanol electrocatalytic oxidation, in coupling with high-purity H 2 production at the cathode. The potential for electrocatalytic oxidation of ethanol and H 2 evolution was significantly reduced by 200 mV compared to pure water splitting at 25 mA cm −2 . The boundary layer thickness on the anodic electrode surface could be decreased from 86.66 μm to 66.21 μm with the flow rate increased from 0 to 0.82 cm min −1 . Compared to the batch mode, The conversion rate of ethanol can be increased from 59 % to 100 % and the selectivity of acetic acid can be increased from 88 % to 100 % under the flow-through mode. The Faraday efficiency of the anode achieved an increase from 76 % to over 99 % and the H 2 production of the cathode increased by 31 % under the flow-through mode.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?