Phase composition, microstructure and thermophysical properties of the Srx(Zr0.9Y0.05Yb0.05)O1.95+x ceramics

Wen Ma,Yuanming Gao,Jingxin Zhang,Yu Bai,Ruiling Jia,Hongying Dong,Ruijun Wang,Manyu Bao

DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.12.031

IF: 5.7

2021-04-01

Journal of the European Ceramic Society

Abstract:Srx(Zr0.9Y0.05Yb0.05)O1.95+x (x=1.0, 0.9, 0.8, 0.7) ceramics were prepared by solid state reaction sintering. The sintered Sr1.0(Zr0.9Y0.05Yb0.05)O2.95 is a single-phase solid solution while the sintered Srx(Zr0.9Y0.05Yb0.05)O1.95+x (x=0.9−0.7) are composites, and a significant grain growth inhibition is observed in the sintered Srx(Zr0.9Y0.05Yb0.05)O1.95+x (x=1.0, 0.9). Rare-earth elements distribution in the bulk materials indicates that Yb and Y preferentially substitute Zr-sites in SrZrO3, and the highest solubility of RE2O3 in pure SrZrO3 is ∼0.8 mol%. The sintered Srx(Zr0.9Y0.05Yb0.05)O1.95+x have high thermal expansion coefficients up to ∼11.0×10−6 K-1 (1200°C). Sr0.8(Zr0.9Y0.05Yb0.05)O2.75 has the lowest thermal conductivity of 1.38 W·m-1·K-1 at 800°C. Srx(Zr0.9Y0.05Yb0.05)O1.95+x (x=1.0, 0.9, 0.8) show no phase transition from 600 to 1400°C, whereas Srx(Zr0.9Y0.05Yb0.05)O1.95+x (x=0.9, 0.8) have excellent high-temperature phase stability over the whole investigated temperature range. Therefore, Srx(Zr0.9Y0.05Yb0.05)O1.95+x (x=1.0, 0.9, 0.8) are considered as promising TBCs materials that might be operated at higher temperatures compared to YSZ.

materials science, ceramics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the performance improvement of thermal barrier coating materials at high temperatures. Specifically, the research aims to explore the phase composition, microstructure and thermophysical properties at high temperatures of \( \text{Sr}_x(\text{Zr}_{0.9}\text{Y}_{0.05}\text{Yb}_{0.05})\text{O}_{1.95+x} \) ceramics with different strontium contents as thermal barrier coating (TBCs) materials through synthesis and characterization. The paper focuses on the following aspects:

1. **Phase composition**: Study the phase composition changes of \( \text{Sr}_x(\text{Zr}_{0.9}\text{Y}_{0.05}\text{Yb}_{0.05})\text{O}_{1.95+x} \) ceramics with different strontium contents, especially observe whether there is a second phase and its impact on material properties.

2. **Microstructure**: Analyze the microstructure of \( \text{Sr}_x(\text{Zr}_{0.9}\text{Y}_{0.05}\text{Yb}_{0.05})\text{O}_{1.95+x} \) ceramics with different strontium contents, including the phenomenon of grain growth inhibition.

3. **Thermophysical properties**: Measure the thermophysical properties such as the coefficient of thermal expansion, thermal conductivity, and thermal diffusivity of \( \text{Sr}_x(\text{Zr}_{0.9}\text{Y}_{0.05}\text{Yb}_{0.05})\text{O}_{1.95+x} \) ceramics with different strontium contents, and compare them with existing thermal barrier coating materials (such as YSZ).

4. **High - temperature phase stability**: Evaluate the phase stability of \( \text{Sr}_x(\text{Zr}_{0.9}\text{Y}_{0.05}\text{Yb}_{0.05})\text{O}_{1.95+x} \) ceramics with different strontium contents in the temperature range from 600 to 1400°C to determine their potential as thermal barrier coating materials for high - temperature applications.

5. **Mechanical properties**: Test the microhardness, elastic modulus and fracture toughness of \( \text{Sr}_x(\text{Zr}_{0.9}\text{Y}_{0.05}\text{Yb}_{0.05})\text{O}_{1.95+x} \) ceramics with different strontium contents, and evaluate their mechanical properties as thermal barrier coating materials.

Through these studies, the paper hopes to find a thermal barrier coating material that can work stably at higher temperatures, thereby increasing the operating temperature and efficiency of gas turbines and aero - engines.