Abstract:Naturally occurring coatings on aluminum metal, such as its oxide or hydroxide, serve to protect the material from corrosion. Understanding the conditions under which these coatings mechanically fail is therefore expected to be an important aspect of predictive models for aluminum component lifetimes. To this end, we develop and apply a molecular dynamics (MD) modeling framework for conducting tension tests that is capable of isolating factors governing the mechanical strength as a function of coating chemistry, defect morphology, and variables associated with the loading path. We consider two representative materials, including γ-Al2O3 and γ-Al(OH)3 (i.e., oxide and hydroxide), both of which form readily as aluminum surface coatings. Our results indicate that defects have a significant bearing on the strength of aluminum oxide, with grain boundaries serving to reduce the strain at failure from εzz = 0.300 to 0.219, relative to perfect single crystal. Our simulations also predict that porosity lowers the elastic stiffness and yield strength of the oxide. Relative to perfect crystal, we find porosity factors of 5%, 10% and 20% decrease the yield stress by 26%, 36% and 53%, respectively. MD predicts that perfect hydroxide and oxide single crystal have respective strains at failure of 0.08 and 0.31 under tensile uniaxial strain loading, and that the corresponding yield stresses are respectively 1.6 and 11.1 GPa. These data indicate that the hydroxide is substantially more susceptible to mechanical failure than the oxide. Our results, coupled with literature findings that indicate hot and humid conditions favor formation of hydroxide and defective oxide coatings, indicate the potential for a complicated dependence of aluminum corrosion susceptibility and stress corrosion cracking on aging history.

Probabilistic model of the fatigue life of epoxy-coated aluminum alloys considering atmospheric exposure

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Probabilistic fatigue life assessment of bridge welded joints considering steel corrosion

Actual Marine Atmospheric Pre-Corrosion Fatigue Performance of 7075-T73 Aluminum Alloy

Corrosion-crack path based probabilistic model to predict the durability behavior of RC components

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Multiaxial Fatigue of 6061-T6 Aluminum Alloy under Corrosive Environment

Environment-induced Fatigue Cracking Behavior of Aluminum Alloys and Modification Methods

INFLUENCE OF COATING OF COVERING AIRPLANE ON CORROSION FATIGUE LIFE OF ALUMINIUM ALLOY LY12CZ

Fatigue damage evolution and failure of pre‐corroded aluminum alloy 7075‐T651 under air and corrosion environments

Probabilistic corrosion fatigue life assessment of a suspension bridge instrumented with long-term structural health monitoring system

Impact of alternating corrosion and fatigue on the fatigue life of a 7475-T7351 aluminum alloy in an aircraft beam structure

Effect of static elastic stress on the corrosion behavior of 7A04 aluminum alloy exposed to real marine atmospheric environment

Influence of Pre-stress Corrosion on Fatigue Life of 2A12-T4 Aluminum Alloy

A Nonlinear Cumulative Evolution Model for Corrosion Fatigue Damage

Predicted Fracture Tendency of Naturally Occurring Aluminum Surface Coatings under Tensile Loading

Electrochemical Study on Corrosion Damage of 7B04 Aluminum Alloy/Anodic Film/Epoxy Coating System in Simulated Marine Atmospheric Environment

Effect of Prior Corrosion State on the Fatigue Small Cracking Behaviour of 6151-T6 Aluminum Alloy

Effect of pitting corrosion on fatigue and crack growth behavior of both aluminum alloy 2024-t 62 and its panel

Effect of cold expansion on the fatigue life of multi-hole 7075-T6 aluminum alloy structures under the pre-corrosion condition

A general energy-based model for fatigue life prediction of high-temperature structural materials