Abstract:Organic light-emitting diodes (OLEDs) fabricated on flexible transparent substrates have found application in displays, lighting, and signage. Optimization of the fabrication procedures is critical for commercialization to maximize performance and reduce costs. Utilization of the slot-die coating technique, a solution-processing roll-to-roll method, has emerged as a viable method to manufacture flexible OLED devices. Here, the fabrication of flexible OLEDs via the slot-die coating technique under ambient condition is reported. The OLEDs have a simple architecture of polyethylene terephthalate (PET)/indium–tin oxide (ITO)/hole injection layer (HIL)/emissive layer (EML)/electron injection layer (EIL)/Ag, where poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is used as the HIL, Super Yellow (SY, poly(1,4-phenylenevinylene) copolymer) is used as the EML, and poly((9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)) (PFN) is used as the EIL. The optimization of the PFN layer using slot-die coating technique is focused by varying solvent, solvent additives, substrate temperature, and coating speeds. The OLEDs that have PFN layers processed with the known solvent additives, 1,8-diiodooctane (DIO) or diphenyl ether (DPE), show a performance increase compared to OLEDs based on PFN layers processed with no solvent additives. Finally, large-area multicolor OLEDs are constructed with organic/polymer layers being slot-die coated in sequence, of which all display homogeneous luminance under bending/folding conditions, highlighting the potential of this simple device structure and processing method.

Improving film uniformity and interface solvent resistance to realize multilayer printing of OLED devices

Inkjet Printing Multilayer OLEDs with High Efficiency Based on the Blurred Interface

Performance Optimization of OLED Device with LB Film of PEDOT-PSS

Thickness uniformity adjustment of inkjet printed light-emitting polymer films by solvent mixture

Interfaces and pattern resolution of inkjet-printed organic light-emitting diodes with a novel hole transport layer

A Triple Layer Printed Blue OLED with Blurred Interface

Low-temperature cross-linkable hole transporting materials through chemical doping for solution-processed green PHOLEDs

A Solvent/Non-Solvent System for Achieving Solution-Processed Multilayer Organic Light-Emitting Devices

Controlling the polarity and viscosity of small molecule ink to suppress the contact line receding and coffee ring effect during inkjet printing

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

ITO/Ag/ITO Multilayer Polymer Films by Roll-to-Roll Process and Performance of Flexible OLED Devices

Inkjet-printing Line Film with Varied Droplet-Spacing

Application of the LB Film Method of PEDOT-PSS in OLED Device

80‐3: All Organic Layers Inkjet Printed OLEDs with a Printable Electronic Transport Layer

Slot‐Die Coating of All Organic/Polymer Layers for Large‐Area Flexible OLEDs: Improved Device Performance with Interlayer Modification

Blended Host Ink for Solution Processing High Performance Phosphorescent OLEDs

Double Layer Printed High Performance OLED Based on PEDOT:PSS/Ir(bt)2acac:CDBP

A Thermally Cross-Linked Hole-Transporting Film with the Remarkable Solvent Resistance for Solution-Processed OLEDs

Efficient Conjugated-Polymer Optoelectronic Devices Fabricated by Thin-Film Transfer-Printing Technique

Single-crystalline hole-transporting layers for efficient and stable organic light-emitting devices

Controlling the Surface Wettability of the Polymer Dielectric for Improved Resolution of Inkjet-Printed Electrodes and Patterned Channel Regions in Low-Voltage Solution-Processed Organic Thin Film Transistors