Abstract:Avoiding unnecessary methane (CH4) emissions is an easy way to mitigate the effects ofclimate change, since methane has a higher global warming potential and a shorter lifetimecompared to carbon dioxide (CO2) and often no purpose is served with the flaring. Flaring isthe disposal of associated gas by combustion. In some cases, the flaring is unavoidable toensure the safety of the personnel, while in other instances flaring can easily be avoided,resulting in unnecessary emissions. Yearly, approximately 140 billion cubic meters is flaredglobally. With a destruction rate efficiency (DRE) of 98%, this results in yearly GHGs emissionof 315 Mt of CO2 and 1.4 Mt of CH4 (or 315 Mt and 42 Mt of CO2 equivalent). It is speculatedthat the DRE of flares in operation is generally lower. For example, Plant et al. 2022 found aDRE of 91% across three oil basins in the United States using an aircraft-based study.However, there is still a lack of experimental data from other countries and on facility-scale.In this research, the active AirCore system described by Andersen et al. 2018 was improvedand used to determine the flaring efficiency from gas flares in the Netherlands. An in-situCO2 sensor was added to obtain an in-flight signal allowing to reliably sample the entirecross section of the plume. To test the system, it was used during two separate campaignsin the Netherlands. The flaring (by a Dutch national gas grid operator) is a routine part ofscheduled infrastructure maintenance. The operator’s mobile flaring unit has beenspecifically designed for high-efficiency combustion. In the flare plume, we observed a DREof 99.7% ± 0.2%. However, the last 1.2 bar absolute (of 40) that remains in the gas pipes isvented and decreases the methane emission mitigation efficacy (MEME) of the operator’sprocedure with 3%. Additionally, using the in-situ sensor we were able to determine the CO2fluxes from flaring during the campaigns which equated to a CH4 burn rate of 1240 ± 300m3/h over three different flights, which agrees with the nominal burn rate of 1200 m3/h. Thisshows that the system can characterize flaring efficiency and emissions well, which providesus the capability to use the system in future flaring campaigns where the gas flushing rate isstill unknown. ReferencesAndersen, T., Scheeren, B., Peters, W., Chen, H. (2018). A UAV-based active Aircore system formeasurements of greenhouse gases. Atmos. Meas. Tech., 11, 2683-2699,https://doi.org/10.5194/amt-11-2683-2018Plant, G., Kort, E. A., Brandt, A. R., Chen, Y., Fordice, G., Gorchov Negron, A. M., Schwietzke, S.,Smith, M., & Zavala-Araiza, D. (2022). Inefficient and unlit natural gas flares both emit largequantities of methane. Science, 377(6614), 1566–1571. https://doi.org/10.1126/science.abq0385

The first global catalogue of gas flaring sources derived from a multi-temporal time series of OLI and MSI daytime data: the DAFI v2 algorithm

Multi-Temporal Satellite Investigation of gas Flaring in Iraq and Iran: The DAFI Porting on Collection 2 Landsat 8/9 and Sentinel 2A/B

An approach to detect gas flaring sites using sentinel-2 MSI and NOAA-20 VIIRS images

A New Perspective on Estimation of Gas Flaring Volume From Space: OLI/TIRS, VIIRS, and TROPOMI

A new achievement of satellite-based gas flaring volume estimation: decision tree modeling

Monitoring gas flaring in Texas using time-series sentinel-2 MSI and landsat-8 OLI images

Global Declines of Offshore Gas Flaring Inadequate to Meet the 2030 Goal

Global Proliferation of Offshore Gas Flaring Areas

Gas flaring detecting based on Normalized Hotspot Index using multi-source remote sensing data: a case study of Xinjiang

AI-Enhanced Gas Flares Remote Sensing and Visual Inspection: Trends and Challenges

The Open-source Data Inventory for Anthropogenic Carbon dioxide (CO2), version 2016 (ODIAC2016): A global, monthly fossil-fuel CO2 gridded emission data product for tracer transport simulations and surface flux inversions

Improving the Active AirCore System to Determine the Destruction Rate Efficiency of Gas Flares in the Netherlands

A Global Gas Flaring Black Carbon Emission Rate Dataset from 1994 to 2012

Quantifying flare combustion efficiency using an imaging fourier transform spectrometer

Black carbon plumes from gas flaring in North Africa identified from multi-spectral imagery with deep learning

Quantifying flare combustion efficiency using a long wave infrared Fourier transform spectrometer

Application of machine learning to gas flaring

Updated Global Fuel Exploitation Inventory (GFEI) for methane emissions from the oil, gas, and coal sectors: evaluation with inversions of atmospheric methane observations

Gas flaring: technicalities, challenges, and the economic potentials

Changes in Climate Indices (Ivanov, Barat, and Emberger) Due to Greenhouse Gas Emissions From Gas Flares In Ahvaz Oil Field (2008-2018)

Enhancement of Nighttime Fire Detection and Combustion Efficiency Characterization Using Suomi-NPP and NOAA-20 VIIRS Instruments