Abstract:Phase change material (PCM)/ceramic composite is qualified to be a novel composite thermal energy storage (TES) material, which can simultaneously utilize the latent heat of phase change materials and sensible heat of ceramic matrix materials to accomplish the storage and release of thermal energy. It exhibits a wide application prospect in the field of medium and high temperature thermal energy storage. However, based on the ceramic porous adsorption PCM, there is still the risk of leakage after the PCM melts in the thermal energy storage stage. In this paper, SnBi58 alloy microencapsulated phase change material (MEPCM) with high thermal reliability was prepared by “double-layer coating, sacrificing inner layer” method, which a thermal expansion void was constructed to accommodate volume expansion of PCM. On this basis, SnBi58 alloy MEPCM/ceramic composite was prepared by the cold-pressing sintering method and its thermal performance was studied. The experimental results show that SnBi58 alloy MEPCM/ceramic composite does not leak at the MEPCM/Matrix mass ratio of 2.5:1, but SnBi58 alloy/ceramic composite leaks at the SnBi58 alloy/Matrix mass ratio of 1.5:1, indicating that SnBi58 alloy MEPCM has good thermal reliability and leak resistance. In addition, compared with the ceramic matrix material, the latent heat of MEPCM/ceramic composite with a mass ratio of 2.5:1 is increased by 30.24 J/g and the thermal conductivity reaches 2.853 W/(m·K), which is 3.67 times of the matrix material. Furthermore, thermal performances of four MEPCM/ceramic composite with different proportions were tested and compared, including thermal conductivity, thermal response curve and infrared thermal imaging. The results show that the higher the proportion of MEPCM, the better the thermal performance of the MEPCM/ceramic composite. Moreover, to predict the thermal conductivity of the novel composites, six thermal conductivity models were compared based on the experimental results, and the results show that the prediction error of Maxwell-Eucken is the smallest which can be used to predict the thermal conductivity of MEPCM/ceramic composite. Finally, the thermal reliability of the composite was tested. The results of DSC and XRD showed that the thermal properties and chemical structure basically have no change before and after thermal cycling. MEPCM/ceramic composite has excellent thermal reliability.

Novel microencapsulated ternary eutectic alloy-based phase change material

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Flexible core–shell structured Al-Cu alloy phase change materials for heat management

Preparation, Characterization, and Thermal Properties of Microencapsulated Phase Change Material for Low-Temperature Thermal Energy Storage

Synthesis and Characterization of Mixed Alkanes Microcapsules with Phase Change Temperature below Ice Point for Cryogenic Thermal Energy Storage

Fabrication and evaluating thermophysical properties of microencapsulated organic and eutectic phase change material

Micro-encapsulation of a low-melting-point alloy phase change material and its application in electronic thermal management

Preparation and thermal performance of a novel alloy microencapsulated phase change material (MEPCM)/ceramic composite

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

Development of a novel Al-Si microcapsules with heat-resistant, high latent heat, and efficient solar heat absorption

Phase Engineered Composite Phase Change Materials for Thermal Energy Manipulation

Micro- and nano-encapsulated metal and alloy-based phase-change materials for thermal energy storage

Cadmium Sulfide—Reinforced Double-Shell Microencapsulated Phase Change Materials for Advanced Thermal Energy Storage

Synthesis and Characterization of Microencapsulated Myristic Acid–palmitic Acid Eutectic Mixture As Phase Change Material for Thermal Energy Storage

Development of hybrid MgO/GO modified microencapsulated phase change material for thermal energy management: An experimental approach

Microencapsulated phase change material through cellulose nanofibrils stabilized Pickering emulsion templating

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Phase Change Microcapsules with a Polystyrene/Boron Nitride Nanosheet Hybrid Shell for Enhanced Thermal Management of Electronics

Macro-encapsulation of metal balls prepared by waste aluminum cans in ceramic capsules with reserved space

Experimental evaluation of binary and ternary eutectic phase change material for sustainable thermal energy storage

Thermo-mechanical Analysis of Microcapsules Containing Phase Change Materials for Cold Storage