Abstract:Joint-preserving surgical treatment of complex unstable proximal humerus fractures remains challenging, with high failure rates even following state-of-the-art locked plating. Enhancement of implants could help improve outcomes. By overcoming limitations of conventional biomechanical testing, finite element (FE) analysis enables design optimization but requires stringent validation. This study aimed to computationally enhance the design of an existing locking plate to provide superior fixation stability and evaluate the benefit experimentally in a matched-pair fashion. Further aims were the evaluation of instrumentation accuracy and its potential influence on the specimen-specific predictive ability of FE. Screw trajectories of an existing commercial plate were adjusted to reduce the predicted cyclic cut-out failure risk and define the enhanced (EH) implant design based on results of a previous parametric FE study using 19 left proximal humerus models (Set A). Superiority of EH versus the original (OG) design was tested using nine pairs of human proximal humeri ( N = 18, Set B). Specimen-specific CT-based virtual preoperative planning defined osteotomies replicating a complex 3-part fracture and fixation with a locking plate using six screws. Bone specimens were prepared, osteotomized and instrumented according to the preoperative plan via a standardized procedure utilizing 3D-printed guides. Cut-out failure of OG and EH implant designs was compared in paired groups with both FE analysis and cyclic biomechanical testing. The computationally enhanced implant configuration achieved significantly more cycles to cut-out failure compared to the standard OG design ( p < 0.01), confirming the significantly lower peri-implant bone strain predicted by FE for the EH versus OG groups ( p < 0.001). The magnitude of instrumentation inaccuracies was small but had a significant effect on the predicted failure risk ( p < 0.01). The sample-specific FE predictions strongly correlated with the experimental results (R 2 = 0.70) when incorporating instrumentation inaccuracies. These findings demonstrate the power and validity of FE simulations in improving implant designs towards superior fixation stability of proximal humerus fractures. Computational optimization could be performed involving further implant features and help decrease failure rates. The results underline the importance of accurate surgical execution of implant fixations and the need for high consistency in validation studies.

Biomechanical Design Optimization of Clavicle Midshaft Fracture Plates: A Review

A Mechanistic Analysis of 16 Options

Biomechanical design of a new proximal humerus fracture plate using alternative materials

Canceling Notch Improves the Mechanical Safety of Clavicle Locking Plate: A 3D Finite Element Study.

Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis

Biomechanical analysis of four augmented fixations of plate osteosynthesis for comminuted mid-shaft clavicle fracture: A finite element approach

Tuberosity reconstruction baseplate for shoulder hemiarthroplasty: Morphological design and biomaterial application

A biomechanical comparison of four different fixation methods for midshaft clavicle fractures

Biomechanical analysis of a novel clavicular hook plate for the treatment of acromioclavicular joint dislocation: A finite element analysis

Finite Element Analysis of Locking Plate and Two Types of Intramedullary Nails for Treating Mid-Shaft Clavicle Fractures.

Topology optimization and biomechanical evaluation of bone plates for tibial bone fractures considering bone healing

[Finite element analysis of anatomic plate fixation for proximal clavicular fractures]

Topological optimization of anterior cervical plate (ACP) and its biomechanic characteristics

Study on the characteristics of increased mechanical stiffness according to changes in LCP shape to reinforce clavicle fractures

Biomechanical Study of Plate Fixation for Femoral Shaft Fracture

Biomechanical Analysis of Fixation Devices for Basicervical Femoral Neck Fractures

Biomechanical comparison of plate materials and designs for subcondylar fracture fixation: An assessment

Evaluating the Outcomes of Managing Displaced Clavicular Fractures by Using Precontoured Clavicular Plates

Mechanically compliant locking plates for diaphyseal fracture fixation: A biomechanical study

Locking Plates With Computationally Enhanced Screw Trajectories Provide Superior Biomechanical Fixation Stability of Complex Proximal Humerus Fractures

Biomechanical Study of Two Alternative Methods for the Treatment of Vertical Femoral Neck Fractures – A Finite Element Analysis