Investigating Water and Ion Transport in a Novel Cell Design for Seawater Electrolysis
Mohammed Al Murisi,Masoomeh Ghasemi,Rashad Ali,Xiaoxuan Yang,Yasmin Bimbatti,Jeffrey McCutcheon,Paul Kohl,Sirivatch Shimpalee,William Earl Mustain
DOI: https://doi.org/10.1149/ma2024-01341722mtgabs
2024-08-09
ECS Meeting Abstracts
Abstract:With increasing concerns about the climate change associated with the carbon dioxide emission from utilizing traditional fuels, hydrogen has become a preferred low-carbon energy carrier. For hydrogen to truly be a clean source of energy, it must be produced from a renewable source of energy through water electrolysis. Theoretically, for each kilogram of hydrogen to be produced 9 kg of high-purity water need to be consumed, thus the enormous use of clean water for H 2 production may worsen the shortage of fresh water in many parts of the world. Owing to its abundance, seawater has received great attention in the field of hydrogen production; however, there are many challenges associated with the direct use of seawater for electrolysis. In traditional systems, the seawater is first deionized by reverse osmosis (RO) before being fed to the electrolyzer. The RO system adds complexity to the system and requires energy to be expended for the deionization. Therefore, modern systems have aimed to directly electrolyze seawater, but this comes with it own issues including electrode corrosion, scaling from the ions present in saline water, environmental concerns associated with competitive chlorine evolution reaction, and increased membrane resistance limiting the overall performance of saline water electrolysis. Several strategies have been proposed to overcome these challenges including developing selective electrocatalysts, blocking strategy, pH buffer strategy, etc. This project sought to overcome the issues with direct seawater utilization by designing a cell that is driven by osmotic separation, but does not require an external power source. In this device, high concentration acid/base concentrations are maintained in contact with another compartment containing seawater. The acid/base reservoirs act as draw solutions, taking water passively from seawater due to their differences in osmotic pressure. This talk will focus on the cell design and operation, and include both experimental and modeling results. The rate of water transport with various cell operating configurations was quantified alongside the rate of chloride ion crossover through the anion exchange membrane. New methods for chloride mitigation were explored – including cell operating conditions, membrane design and absorption. Multiple cell configurations will be shown and strategies for reducing the cell operating voltage will be discussed.