Abstract:Considering the fact that the acoustic attenuation increases with the carrier frequency, the attention shifts towards the low-frequency ultrasonic waves in the field of ultrasonic nondestructive testing and structural health monitoring of highly attenuative materials. However, low-frequency ultrasonic waves may sharply reduce the imaging resolution, although it can propagate longer distance. When an ultrasonic primary longitudinal wave tone burst propagates through an elastic solid with quadratic nonlinearity, it results in the generation of the quasi-static component (QSC). The QSC has advantages of low attenuation and better sound beam directivity, so it is expected to be a novel tool for non-destructive testing of highly attenuative materials. Therefore, aimed at detecting defects and improving the imaging quality in highly attenuative materials, a novel synthetic aperture focusing technique in the time domain combined with nonlinear ultrasonic QSC is proposed. In this study, experimental examinations were carried out to evaluate the imaging performance of the proposed method and low-frequency ultrasonic waves, in which a pulse-echo transducer is used to detect the QSC pulse generated by a primary longitudinal wave. The imaging results indicate that the proposed method has significant advantages over low-frequency ultrasonic waves in terms of visual presentation of defects. The effect of the duration of the tone burst on imaging quality is also investigated, and the results show that the imaging quality is optimal when the cycle number meets the requirement for the maximum response of QSC. This study would open new perspectives for the research on ultrasonic imaging in highly attenuative materials.

An electromagnetic ultrasonic synthetic aperture focusing imaging method based on wave packet decomposition optimisation to eliminate artefacts

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Frequency-domain Synthetic Aperture Focusing for Helical Ultrasonic Imaging

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Focusing Dimension Optimization of Shear Vertical Wave EMATs Using Orthogonal Test Method

Improved synthetic aperture focusing technique with applications in high-frequency ultrasound imaging

Defect detection and imaging using electromagnetic acoustic transducer with butterfly coil

Synthetic Aperture Focusing Imaging for Defect Detection in Highly Attenuative Materials Using Quasi-Static Components of Ultrasonic Longitudinal Waves

Improve Spatial Resolutions of Ultrasonic Phased-Array Inspection Using SAFT

Synthetic Aperture Focusing Technique and Contrast Source Inversion Algorithm Applied in Elastic Wave Imaging

Time-domain Approach for Ultrasonic Non-destructive Detection Based on Synthetic Aperture Focusing Technique

Efficient Frequency-Domain Synthetic Aperture Focusing Techniques for Imaging With a High-Frequency Single-Element Focused Transducer

Synthetic Aperture Focusing Technique in High - Frequency Ultrasound Imaging to Locate Layer Delamination

Ultrasound Autofocusing: Common Midpoint Phase Error Optimization via Differentiable Beamforming

Imaging of subsurface defects with surface wave SAFT based on an array pickup EMAT

Research on sector scanning imaging technology of EMAT for through-hole defects in aluminium plates

Ultrasonic Array F-SAFT Imaging Method with PSM

A synthetic aperture focusing technique with optimized beamforming for high-frequency ultrasound

Ultrasonic Phased Array Total Focusing Method Based on Sparse Deconvolution

Modified Synthetic Focusing with Direction of Arrival Function for Ultrasound Imaging

Numerical Modelling of Unilateral Point-Focusing Electromagnetic Acoustic Transducer with Experimental Validation