Abstract:The ancient white bricks in the Yichun region occupy a special place in Chinese cultural heritage. In order to study the material properties of these unique bricks, a series of experimental studies were conducted, including measurement of density, compressive strength, thermal conductivity, chemical composition, phase composition, pore structure, micro morphology, and firing temperature. These material properties were tested and analyzed using a variety of methods including X-ray fluorescence (XRF) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM), mercury injection test, thermal expansion test, etc. The material properties of the ancient white bricks were also compared with the material properties of the traditional red bricks and of the traditional blue bricks. The results reveal that while the thermal conductivity of the ancient white bricks is lower than that of the traditional red bricks and of the traditional blue bricks, the ancient white bricks’ density is actually slightly higher than that of the traditional red bricks and of the traditional blue bricks. An additional finding is that whereas the compressive strength of the white bricks from the ancient city walls is higher than that of the traditional red bricks and of the traditional blue bricks, the compressive strength of the white bricks from the traditional residential walls is similar to that of the traditional red bricks and of the traditional blue bricks. The main components of these two types of ancient white bricks are basically consistent with the constituents of the natural clay originating in the Yichun region, such as Al-Mg compounds and silicide, furthermore the proportion of each of these main elements is also similar. The phases of these two types of ancient white bricks are mainly composed of γ-Fe2O3, FeCO3, FeS, enstatite, gaylussite, talc, calcite, quartz, and corundum. The pore size of the two types of ancient white bricks is mainly concentrated in the interval between 0.1 μm and 1 μm, which is similar to the traditional blue bricks’, but is smaller than the traditional red bricks’. The firing temperature of the white bricks from the ancient city walls is between 650°C and 700°C, and the firing temperature of the white bricks from the traditional residential walls is approximately 600°C. These results can provide the basis for the excavation of traditional techniques and a scientific conservation strategy for the ancient Chinese white bricks.

The use of mineralogical indicators for the assessment of firing temperature in fired-clay bodies

Investigating Temperature Effects on the Shear Behavior of Clays: Molecular Dynamics Simulations

Determination and Interpretation of Firing Temperature in Ancient Porcelain Utilizing Thermal Expansion Analysis

Cooling rate effect on thermoremanent magnetization in archaeological baked clays: an experimental study on modern bricks

Reconstructing the Firing Process of Pottery from Dangxiong Cemetery, Tibet, China: Estimating Soaking Time Through XRD and Thermal Expansion Analyses

Influence of sawdust particle size on fired clay brick properties

Physicochemical and Performance Assessment of Clay Based Refractory Bricks for Incinerator Application

Preliminary microstructural research of clay solid bricks taken from historic buildings located in Poland

Influence of mineral composition and firing temperature on the micro- and mesoporosity of replicate archaeological ceramics

Ceramic technology: how to recognize clay processing

Transient Thermal Analysis of a Kiln Using Different Numerical Approaches by Means of CFD

Comparative study of technological behavior of German ball clay and Italian kaolinitic clay in unconventional porcelain stoneware body

Correlation analyses of effects of temperature on physical and mechanical properties of clay

The firing temperatures of burnt clay from the Chinese neolithic cultural relics and its paleoenvironmental imprints

Numerical Investigations on the Enhancement of Convective Heat Transfer in Fast-Firing Brick Kilns

Experimental Research on Material Properties of Ancient White Bricks in the Yichun Region, China

Mechanical Properties of Fireclay Bricks from Binaliw Clay

Influence of calcination temperature on the physical and chemical characteristics of kaolinitic clays for use as supplementary cementitious materials

Characterization of clays and the technology of Roman ceramics production

A Study of Pigment, Adhesive, and Firing Temperature in Pottery Figurines Excavated from the Tomb of Qibi Ming, China

Thermal Behavior of Ceramic Bodies Based on Fly Ash and Smectites