Abstract:Arc fault occurs frequently in aircraft system. Once the arc fault occurs, great harm will be caused, so it is necessary to diagnose and eliminate it in time. The physical phenomena of AC(Alternating Current) arc such as light and sound are not obvious when it occurs, because of its zero break characteristic.so it is difficult to detect. Therefore, it is necessary to study AC arc detection. In AC rectifier bridge load circuit, the current waveform under normal condition is similar to the waveform under arc condition, which makes it an aporia to detect AC arc. However, arc characteristics at present such as current change rate, flat shoulder ratio and harmonic component extracted from arc current are not suitable for arc fault diagnosis of rectifier bridge load circuit. Based on the automatic AC arc research platform, the serial and parallel arc faults experiments of the rectifier bridge load circuit are done. The condition of the experiment is 115V/360Hz-800Hz. The randomness of arc is amplified by the difference between adjacent current cycle's. On this basis, the effective value standard deviation of adjacent cycle's difference, the DC(Direct Current) component standard deviation of adjacent cycle's difference and the even harmonic power of adjacent cycle's difference are extracted from time domain and frequency domain respectively as AC arc fault characteristics. By the method of ratio and threshold, this paper verifies that the extracted characteristics are suitable for AC arc fault detection in rectifier bridge load circuits.

DC Arc Model Superimposing Current-Controlled Arc Noise on a Heuristic Average Model

Physics-and Data-Based Random Conductance AC Arc Model

Parameter identification of DC arc models using chaotic quantum cuckoo search

Simulation of Fault Arc Using Conventional Arc Models

DC Arc Self-Extinction and Dynamic Arc Model in Open-Space Condition Using a Yacob Ladder

Research on Improved Schwarz Arc Model Considering Dynamic Arc Length

DC Arc Numerical Calculations and Experimental Researches Based on the Arcing Horn Used in Over-head Line

Research on AC Arc Fault Characteristics Based on the Difference Between Adjacent Current Cycle

Simulation study on arc motion process of DC miniature circuit breakers

LCC-HVDC System Dynamic Phasor Modeling Based on Improved Switch Function

High-impedance arc fault modeling for distribution networks based on dynamic geometry dimension

Fault Arc Modeling and Analysis in Circuit Breaker in HVDC Converter Station Filter Branch

Research on an Equivalent Heat Source Model of the AC Arc in the Short Gap of a Copper-Core Cable and a Fire Risk Assessment Method

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Modeling and Simulation of Arc Welding Power

An Innovative Arc Fault Model and Detection Method for Circuit Breakers in LCC-HVDC AC Filter Banks

Diagnostic System for Current-Carrying Fault: Modeling, Precaution, and Prediction

Ultra-High-Power Arc Furnace Model for Low Frequency Non-Stationary Inter-harmonics

A Method of DC Arc Detection in All-Electric Aircraft

Research of simulation and experiment on arc characteristics of gas mechanical switch

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker