Microstructure and Tribological Properties of the Ti3AlC2 Coating on A Ti–46Al–2Cr–2Nb Alloy
Jun Cheng,Jiqiang Ma,Licai Fu,Shengyu Zhu,Zhuhui Qiao,Jun Yang,Weimin Liu
DOI: https://doi.org/10.1002/adem.201300504
IF: 3.6
2014-01-01
Advanced Engineering Materials
Abstract:TiAl-based intermetallic alloys are of great interest as TiAl alloy in vacuum exhibits high friction coefficient and structural materials for aerospace and automotive industries because they possess lightweight, high oxidation resistance and excellent elevated temperature strength. Recently, besides the improvement of the room-temperature ductility and strength by the control of microstructure and alloying, much attention has also been paid to investigate the tribological properties of the TiAl based alloy under various environments. However, several studies show that titanium aluminides have high friction coefficient and poor wear resistance, which are the major disadvantages hindering their practical applications related to tribology. In order to enhance the wear resistance of TiAl intermetallics, we have improved the dry sliding wear resistance of the TiAl alloy by adding hard TiB2 at the little expense of the mechanical properties. Apart from this method, surface treatment is an alternative and effective way because of its convenience. The main surface treatments include plasma carburization, laser treatment, gas nitridation, heating technique, microarc oxidation, plasma pack aluminizing, and thermal oxidation treatment. In addition, hot-press sintering is a possible process route to fabricate a thick coating with metallurgical bond to the substrate. Again, this method can fabricate the substrate and coating simultaneously from their individual powders, which would be favorable to enhance the adhesion and reduce internal stress between the coating and substrate. There are numerous moving machine assemblies in aerospace which operate in vacuum. Friction and wear are of vital importance in determining the efficiency, durability, reliability, and robustness of tribological systems in the applications. TiAl-based alloy is promising for aerospace applications, but in our previous work, it was found that the