Abstract:Microelectromechanical system resonant sensors are widely used in high precision applications. Frequency measurement plays an important role in such frequency readout sensors. This paper proposed an improved modified frequency measurement method based on the multi-phase clock (MPC), which can effectively improve the measurement accuracy but does not reduce the output rate. Innovative claims include (1) building a model of measurement error for MPC in which the probability of triggering error under different conditions is calculated, (2) improving the accuracy of the MPC measurement by phase reverse, and (3) proposing an algorithm to eliminate jitters of the measured signal. We compared the measurement results of this optimized MPC realized by the field programmable gate array (FPGA) device with those of the conventional MPC, spectral measurement, and equal precision measurement implemented with the National Instruments acquisition equipment PXI-4461 and USB-6366, respectively. The results show that the bias instability of the adopted method is ∼10 µHz obtained by Allan variance analysis, which is better than that of the other three methods. It can meet the accuracy requirements for the resonant frequency measurement of state-of-the-art resonant accelerometers. In addition, an algorithm running in FPGA is proposed to eliminate jitters caused by the noise of the measured signal for enhancing the robust of optimized MPC. The results demonstrate that the optimized MPC has features of high accuracy and anti-interference capability and can be easily transferred to the application specific integrated circuit in the future due to its full digital circuit version.

MEMS Huygens Clock Based on Synchronized Micromechanical Resonators

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A CMOS Relaxation Oscillator with Process and Temperature Variation Compensation.

Adaptive Frequency-stabilization of MEMS Oscillators Using Mode Coupling

A Low Phase Jitter MEMS Oscillator with Centrally-Anchored Piezoelectric Resonator for Wide Temperature Range Real Time Clock Applications

A Mems Accelerometer Based On Synchronizing Detf Oscillators

Frequency Stability Improvement for Piezoresistive Micromechanical Oscillators Via Synchronization

Coupling piezoresistive MEMS oscillator based on high order synchronization

Chip-Scale Molecular Clock

FREQUENCY STABILITY OF MICROMECHANICAL BEAM OSCILLATOR UNDER SUBHARMONIC SYNCHRONIZATION

Compact Optical Frequency Standard with MEMS Vapor Cells

MEMS Resonators for Frequency Reference and Timing Applications

Phase-delay Induced Variation of Synchronization Bandwidth and Frequency Stability in a Micromechanical Oscillator

Amplifying Charge-Sensing in Micromechanical Oscillators Based on Synchronization

High-precision Frequency Measurement for Microresonant Sensors Based on Improved Modified Multi-Phase Clock Method.

A CMOS Molecular Clock Probing 231.061-Ghz Rotational Line of OCS with Sub-PPB Long-Term Stability and 66-MW DC Power.

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

MEMS Based Ultra-High Order Frequency Multiplication Utilizing Superharmonic Synchronization Effect

A Low Area, Switched-Resistor Based Fractional-N Synthesizer Applied to a MEMS-Based Programmable Oscillator

High Resolution Magnetometer Based on a High Frequency Magnetoelectric MEMS-CMOS Oscillator

Improvement in medium-long term frequency stability of integrating sphere cold atom clock