Abstract:Among solid-state lighting technology, phosphor-converted white light-emitting diodes (pc-WLEDs) are excellent candidates to replace incandescent lamps for their merit of high energy conservation, long lifetime, high luminous efficiency as well as polarized emissions. Semiconductor quantum dots (QDs) are emerging color tunable emissive light converters. They have shown significant promise as light emitters, as solar cells, and in biological imaging. It has been demonstrated that the pc-WLED devices integrated with red emissive ZnCdSe QDs show improved color rendering index of device. However, cadmium-based QDs have limited future owing to the well-known toxicity. Recently, non-cadmium luminescence materials, i.e. CuInS2-based QDs, are investigated as desirable low toxic alternatives. Particularly, CuInS2-based QDs exhibit very broad emissions spectra with full width at half maximum (FWHM) of 100-120 nm, large Stokes shifts of 200~300 meV and finely-tunable emissions. In order to adjust emission wavelengths and improved quantum yield (QY), CuInS2/ZnS (CIS/ZnS) core/shell structure was introduced. Therefore, CIS/ZnS QDs have been extensively investigated and be used as color converter in solid-state lighting. Synthesis and application of CuInS2/ZnS core/shell QDs are conducted using a hot injection route. CIS/ZnS core/shell QDs with molar ratio of Cu:In equal to 1:4 are prepared. For WLED fabrication, the CIS/ZnS QD is dispersed in toluene first, and then it is blended with transparent acrylic-based UV resin. Subsequently, the commercial green-emitting Lu3Al5O12: Ce3+ (LuAG) phosphors are mixed with QDs-resin mixture. After that, the QDs-phosphors-resin mixtures are put in the oven at 140 °C for 1 h to evaporate the toluene. Subsequently, the homogeneous QDs-phosphors-resin mixture is dropped on the top of a blue LED chip (InGaN). Then, the device is cured by 400 W UV light to form WLED. The emission wavelength of CIS/ZnS QD exhibits yellow region of 552 nm with QY of 76 %, and with relatively broad bandwidth of 86 nm. The structure of CIS/ZnS belongs to chalcopyrite phase and its average particle size is 3.2 nm. The luminous efficacy, color rendering index (CRI), correlated color temperature (CCT), and CIE chromaticity coordinate of WLED is 47 lm/W, 89, 5661 K, and (0.33, 0.29), respectively.

Stable down-conversion white light-emitting devices based on highly luminescent copper halides synthesized at room temperature

Self-Assembled Copper Nanoclusters-Based White Light Emitting Diodes with High Performance

Uniform nucleation and growth of Cs 3 Cu 2 I 5 nanocrystals with high luminous efficiency and structural stability and their application in white light-emitting diodes.

Uniform nucleation and growth of Cs3Cu2I5 nanocrystals with high luminous efficiency and structural stability and their application in white light-emitting diodes

Stable Yellow Light-Emitting Devices Based on Ternary Copper Halides with Broadband Emissive Self-Trapped Excitons

Synthesis of Efficient and Stable Tetrabutylammonium Copper Halides with Dual Emissions for Warm White Light‐Emitting Diodes

Copper iodide-based hybrid phosphors for eco-friendly white-light-emitting diodes

White Light‐Emitting Diodes: High Color‐Rendering Index and Stable White Light‐Emitting Diodes by Assembling Two Broadband Emissive Self‐Trapped Excitons (adv. Mater. 2/2021)

White light-emitting devices based on ZnCdS/ZnS and perovskite nanocrystal heterojunction

Efficient Emission in Copper-doped Cs3ZnX5 (X = Cl, I) for white LED and X-ray Scintillator

High Color‐Rendering Index and Stable White Light‐Emitting Diodes by Assembling Two Broadband Emissive Self‐Trapped Excitons

Stable and luminescent cesium copper halide nanocrystals embedded in flexible polymer fibers for fabrication of down-converting WLEDs

Highly emissive 0D Tin(II) hybrid for white LED

Solid-state Thiolate-Stabilized Copper Nanoclusters with Ultrahigh Photoluminescence Quantum Yield for White Light-Emitting Devices

Room-temperature synthesis of blue-emissive zero-dimensional cesium indium halide quantum dots for temperature-stable down-conversion white light-emitting diodes with a half-lifetime of 186 h

Fabrication of CuInS2/ZnS quantum dots-based white light-emitting diodes with high color rendering index

Cesium lead halide perovskite quantum dot-based warm white light-emitting diodes with high color rendering index

Controllable Synthesis of Cu-based quantum dots/nanocrystals and Application in White Light-Emitting Diodes

Mg2+‐Doped Cesium Copper Halide for Bright Electroluminescent White Light‐Emitting Diodes

Highly Luminescent Copper Gallium Selenium Based Multicomponent Quantum Dots: Formation Process and Tunable White-Light Emission

Cs4PbBr6/CsPbBr3 perovskite composites for WLEDs: pure white, high luminous efficiency and tunable color temperature