Abstract:Among solid-state lighting technology, phosphor-converted white light-emitting diodes (pc-WLEDs) are excellent candidates to replace incandescent lamps for their merit of high energy conservation, long lifetime, high luminous efficiency as well as polarized emissions. Semiconductor quantum dots (QDs) are emerging color tunable emissive light converters. They have shown significant promise as light emitters, as solar cells, and in biological imaging. It has been demonstrated that the pc-WLED devices integrated with red emissive ZnCdSe QDs show improved color rendering index of device. However, cadmium-based QDs have limited future owing to the well-known toxicity. Recently, non-cadmium luminescence materials, i.e. CuInS2-based QDs, are investigated as desirable low toxic alternatives. Particularly, CuInS2-based QDs exhibit very broad emissions spectra with full width at half maximum (FWHM) of 100-120 nm, large Stokes shifts of 200~300 meV and finely-tunable emissions. In order to adjust emission wavelengths and improved quantum yield (QY), CuInS2/ZnS (CIS/ZnS) core/shell structure was introduced. Therefore, CIS/ZnS QDs have been extensively investigated and be used as color converter in solid-state lighting. Synthesis and application of CuInS2/ZnS core/shell QDs are conducted using a hot injection route. CIS/ZnS core/shell QDs with molar ratio of Cu:In equal to 1:4 are prepared. For WLED fabrication, the CIS/ZnS QD is dispersed in toluene first, and then it is blended with transparent acrylic-based UV resin. Subsequently, the commercial green-emitting Lu3Al5O12: Ce3+ (LuAG) phosphors are mixed with QDs-resin mixture. After that, the QDs-phosphors-resin mixtures are put in the oven at 140 °C for 1 h to evaporate the toluene. Subsequently, the homogeneous QDs-phosphors-resin mixture is dropped on the top of a blue LED chip (InGaN). Then, the device is cured by 400 W UV light to form WLED. The emission wavelength of CIS/ZnS QD exhibits yellow region of 552 nm with QY of 76 %, and with relatively broad bandwidth of 86 nm. The structure of CIS/ZnS belongs to chalcopyrite phase and its average particle size is 3.2 nm. The luminous efficacy, color rendering index (CRI), correlated color temperature (CCT), and CIE chromaticity coordinate of WLED is 47 lm/W, 89, 5661 K, and (0.33, 0.29), respectively.

Controllable Synthesis of Cu-based quantum dots/nanocrystals and Application in White Light-Emitting Diodes

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Fabrication of CuInS2/ZnS quantum dots-based white light-emitting diodes with high color rendering index

Uniform nucleation and growth of Cs3Cu2I5 nanocrystals with high luminous efficiency and structural stability and their application in white light-emitting diodes

Uniform nucleation and growth of Cs 3 Cu 2 I 5 nanocrystals with high luminous efficiency and structural stability and their application in white light-emitting diodes.

Solid-state Thiolate-Stabilized Copper Nanoclusters with Ultrahigh Photoluminescence Quantum Yield for White Light-Emitting Devices

Self-Assembled Copper Nanoclusters-Based White Light Emitting Diodes with High Performance

Single-Phase Cu,Mn-Codoped ZnGaS/ZnS Quantum Dots for Full-Spectrum White-Light-Emitting Diodes

Controllable Synthesis of Cadmium-Free Blue-Emitting Cu-Ga-Zn-S-Based Nanocrystals for Solution-Processed Quantum-Dot Light-Emitting Diodes

White Light Emitting Diodes Based on Green Graphene Quantum Dots and Red Graphene Quantum Dots

Preparation of Quantum Dot Light-emitting Diodes Based on the Quantum Dots-CBP Hybrid

Highly Luminescent Copper Gallium Selenium Based Multicomponent Quantum Dots: Formation Process and Tunable White-Light Emission

High quantum-yield CdSexS1-x/ZnS core/shell quantum dots for warm white light-emitting diodes with good color rendering.

Scalable synthesis of organic-soluble carbon quantum dots: superior optical properties in solvents, solids, and LEDs.

Synthesis of Multi-Color Fluorescent Carbon Quantum Dots and Solid State CQDs@SiO2 Nanophosphors for Light-Emitting Devices

Emission Tuning of Highly Efficient Quaternary Ag-Cu-Ga-Se/ZnSe Quantum Dots for White Light-Emitting Diodes.

Tunable Emission of Cadmium-Free Transition Metal (cu, Mn, Ag) Co-Doped ZnInS/ZnS Core-Shell Quantum Dots

High-Performance Green and Blue Light-Emitting Diodes Enabled by CdZnSe/ZnS Core/Shell Colloidal Quantum Wells

Synthesis of Red, Green, and Blue Carbon Quantum Dots and Construction of Multicolor Cellulose‐Based Light‐Emitting Diodes

Highly Efficient and Stable CdZnSeS/ZnSeS Quantum Dots for Application in White Light-Emitting Diode

Mg2+‐Doped Cesium Copper Halide for Bright Electroluminescent White Light‐Emitting Diodes