Abstract:PurposeWe seek to investigate an optimization-based one-step method for image reconstruction that explicitly compensates for nonlinear spectral response (i.e., the beam-hardening effect) in dual-energy CT, to investigate the feasibility of the one-step method for enabling two dual-energy partial-angular-scan configurations, referred to as the short- and half-scan configurations, on standard CT scanners without involving additional hardware, and to investigate the potential of the short- and half-scan configurations in reducing imaging dose and scan time in a single-kVp-switch full-scan configuration in which two full rotations are made for collection of dual-energy data. MethodsWe use the one-step method to reconstruct images directly from dual-energy data through solving a nonconvex optimization program that specifies the images to be reconstructed in dual-energy CT. Dual-energy full-scan data are generated from numerical phantoms and collected from physical phantoms with the standard single-kVp-switch full-scan configuration, whereas dual-energy short- and half-scan data are extracted from the corresponding full-scan data. Besides visual inspection and profile-plot comparison, the reconstructed images are analyzed also in quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation. ResultsFollowing the performance of a computer-simulation study to verify that the one-step method can reconstruct numerically accurately basis and monochromatic images of numerical phantoms, we reconstruct basis and monochromatic images by using the one-step method from real data of physical phantoms collected with the full-, short-, and half-scan configurations. Subjective inspection based upon visualization and profile-plot comparison reveals that monochromatic images, which are used often in practical applications, reconstructed from the full-, short-, and half-scan data are largely visually comparable except for some differences in texture details. Moreover, quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation indicate that the short- and half-scan configurations yield results in close agreement with the ground-truth information and that of the full-scan configuration. ConclusionsThe one-step method considered can compensate effectively for the nonlinear spectral response in full- and partial-angular-scan dual-energy CT. It can be exploited for enabling partial-angular-scan configurations on standard CT scanner without involving additional hardware. Visual inspection and quantitative studies reveal that, with the one-step method, partial-angular-scan configurations considered can perform at a level comparable to that of the full-scan configuration, thus suggesting the potential of the two partial-angular-scan configurations in reducing imaging dose and scan time in the standard single-kVp-switch full-scan CT in which two full rotations are performed. The work also yields insights into the investigation and design of other nonstandard scan configurations of potential practical significance in dual-energy CT.

Top-level design and pilot analysis of low-end CT scanners based on linear scanning for developing countries

Low-Dose Liver Ct Images Segmentation and 3d Reconstruction

Simulation on system configuration for stationary head CT using linear carbon nanotube x-ray source arrays

Algorithm-enabled Partial-Angular-scan Configurations for Dual-Energy CT

Top-Level Design and Simulated Performance of the First Portable CT-MR Scanner

Stationary Computed Tomography for Space and other Resource-constrained Environments

Low-dose CT Imaging Techniques Based on New Reconstruction Algorithms

Rotating and Semi-Stationary Multi-Beamline Architecture Study for Cardiac CT Imaging

A low-cost dual energy CT system with sparse data

The Multi-Source Instant CT for Superfast Imaging: System Concept, Reconstruction Algorithms and Experiments

WE‐A‐301‐11: Low Dose Multi‐Slice Helical CT Reconstruction Using Tight Frame Regularization

Image reconstruction and scan configurations enabled by optimization-based algorithms in multispectral CT

Full-length-body CBCT imaging in upright position with robotic-arm system: a simulation study

Low-Cost High-Resolution Animal Spect Imaging on A Clinical Spect Scanner

A low-cost and shielding-free ultra-low-field brain MRI scanner

Top-Level Design and Preliminary Physical Analysis for the First Electron-Beam Micro-Ct Scanner

Fast Imaging By A Single-Slice-Detector Helical Ct

Feasibility Study of Low-Dose Intra-Operative Cone-Beam CT for Image-Guided Surgery

A novel design of industrial real-time CT system based on sparse-view reconstruction and deep-learning image enhancement

CT Reconstruction from Simultaneous Projections: A Step towards Capturing CT in One Go

A Novel Designed Small Angle CT System Based on Overlay Rotation