Abstract:PurposeWe seek to investigate an optimization-based one-step method for image reconstruction that explicitly compensates for nonlinear spectral response (i.e., the beam-hardening effect) in dual-energy CT, to investigate the feasibility of the one-step method for enabling two dual-energy partial-angular-scan configurations, referred to as the short- and half-scan configurations, on standard CT scanners without involving additional hardware, and to investigate the potential of the short- and half-scan configurations in reducing imaging dose and scan time in a single-kVp-switch full-scan configuration in which two full rotations are made for collection of dual-energy data. MethodsWe use the one-step method to reconstruct images directly from dual-energy data through solving a nonconvex optimization program that specifies the images to be reconstructed in dual-energy CT. Dual-energy full-scan data are generated from numerical phantoms and collected from physical phantoms with the standard single-kVp-switch full-scan configuration, whereas dual-energy short- and half-scan data are extracted from the corresponding full-scan data. Besides visual inspection and profile-plot comparison, the reconstructed images are analyzed also in quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation. ResultsFollowing the performance of a computer-simulation study to verify that the one-step method can reconstruct numerically accurately basis and monochromatic images of numerical phantoms, we reconstruct basis and monochromatic images by using the one-step method from real data of physical phantoms collected with the full-, short-, and half-scan configurations. Subjective inspection based upon visualization and profile-plot comparison reveals that monochromatic images, which are used often in practical applications, reconstructed from the full-, short-, and half-scan data are largely visually comparable except for some differences in texture details. Moreover, quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation indicate that the short- and half-scan configurations yield results in close agreement with the ground-truth information and that of the full-scan configuration. ConclusionsThe one-step method considered can compensate effectively for the nonlinear spectral response in full- and partial-angular-scan dual-energy CT. It can be exploited for enabling partial-angular-scan configurations on standard CT scanner without involving additional hardware. Visual inspection and quantitative studies reveal that, with the one-step method, partial-angular-scan configurations considered can perform at a level comparable to that of the full-scan configuration, thus suggesting the potential of the two partial-angular-scan configurations in reducing imaging dose and scan time in the standard single-kVp-switch full-scan CT in which two full rotations are performed. The work also yields insights into the investigation and design of other nonstandard scan configurations of potential practical significance in dual-energy CT.

Rotating and Semi-Stationary Multi-Beamline Architecture Study for Cardiac CT Imaging

Cardiac Ct: A System Architecture Study

Quest for the Ultimate Cardiac CT Scanner

Design of the Multi-Sources Static CT System and Its Dual-Energy Monte Carlo Simulation

Simulation on system configuration for stationary head CT using linear carbon nanotube x-ray source arrays

Algorithm-enabled High-Performance C-arm Cone-Beam CT Angiography of Cerebral Vasculature

C-arm inverse geometry CT for 3D cardiac chamber mapping

Radiographic Imaging with a Linear X-Ray Source and Multi-Row Detector

Development Of Stationary Dedicated Cardiac Spect With Multi-Pinhole Collimators On A Clinical Scanner

Simulation Studies for Triple-Source Helical Cone-Beam CT

Aperture weighted cardiac reconstruction for cone-beam CT

Algorithm-enabled Partial-Angular-scan Configurations for Dual-Energy CT

A Novel Static CT System: the Design of Triple Planes CT and Its Multi-Energy Simulation Results

Model Based Iterative Reconstruction With Spatially Adaptive Sinogram Weights for Wide-Cone Cardiac CT

The Multi-Source Instant CT for Superfast Imaging: System Concept, Reconstruction Algorithms and Experiments

C-arm CT imaging with the extended line-ellipse-line trajectory: first implementation on a state-of-the-art robotic angiography system

Top-level design and pilot analysis of low-end CT scanners based on linear scanning for developing countries

A multi-source inverse-geometry CT system: initial results with an 8 spot x-ray source array

A Novel Designed Small Angle CT System Based on Overlay Rotation

Simulation study of electron beam optics for a distributed X-ray source toward stationary CT architecture

Stationary Computed Tomography for Space and other Resource-constrained Environments