Abstract:This work investigates the effect of variation in vulcanization temperature on the cure behavior, tensile properties, tear strength, hardness, Akron abrasion loss and heat build-up of vulcanized tire tread compound in which the total rubber was replaced with 10% and 20% ground tire rubber (GTR) of 40, 60 and 80 mesh sizes. The first step was the characterization of the GTR using optical microscopy and a thermogravimetric analyzer. The first step of mixing each rubber compound was carried out using an internal mixer (Brabender) at 60°C and 40 rev/min rotor speed and the second step was done on a two-roll mill. The mooney viscosity of each rubber compound was investigated. the cure behavior of the rubber compounds was studied at 140°C, 150°C, and 160°C respectively. Results show that the introduction of GTR reduced vulcanization time, while increased cure temperature resulted in a lower vulcanization time. No significant difference was observed in the vulcanization time at a particular temperature of the rubber sample with different particle sizes and varied amounts of GTR. The introduction of ground tire rubber in the rubber vulcanizate however resulted in decreased tensile strength, tear strength and elongation, and increased hardness, abrasion resistance, modulus and heat build-up. An increase in the vulcanization temperature from 140°C to 150°C and 160°C did not impart a significant reduction in the tensile strength of the vulcanizates containing GTR. Vulcanization at higher temperatures resulted in reduced hardness, and modulus, slightly increased abrasion loss and increased elongation of the vulcanizates containing GTR. The heat build-up increased as the cure temperature increased. Generally, the control sample with no content of ground tire rubber exhibited the best properties. If GTR is to be introduced in rubber matrix at an amount up to 20%, the results suggest that 60 mesh size particles will impart better properties. The optimal vulcanization temperature recommended based on the findings from the work is 150°C.

Improving the mechanical properties of vulcanizates containing ground tire rubber: Recipe optimization with the Taguchi method

Rubber Compounds from Devulcanized Ground Tire Rubber: Recipe Formulation and Characterization

Sustainable thermoplastic elastomers based on thermoplastic polyurethane and ground tire rubber

Reactive Sintering of Ground Tire Rubber (GTR) Modified by a Trans-Polyoctenamer Rubber and Curing Additives

Simultaneous optimization of the vulcanization characteristics and mechanical properties of chloroprene and natural rubber blend by response surface methodology

A Study on the Preparation of a Vulcanizing Mixture and Its Application in Natural Rubber Latex

Optimization of Serial Modular Continuous Mixing Process Parameters for Natural Rubber Composites Reinforced by Silica/Carbon Black

Non-rubber components tuning mechanical properties of natural rubber from vulcanization kinetics

Curing behaviors, mechanical properties, dynamic mechanical analysis and morphologies of natural rubber vulcanizates containing reclaimed rubber

Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates

Effect of Varied Cure Temperature on the Cure Behavior, Mechanical Properties and Heat Build-Up of Solid Tire Tread Compound Containing Different Particles Sizes of Ground Tire Rubber

Modification of Ground Tire Rubber—Promising Approach for Development of Green Composites

Optimization of mechanical and dynamic-mechanical properties of electron beam irradiation of reclaimed tire rubber/poly (ethylene-co-vinyl acetate) nanocomposite by design of experiment

Tailoring the properties of ground tire rubber/high-density polyethylene blends by combining surface devulcanization and in-situ grafting technology

Processing, Mechanical and Morphological Properties of GTR Modified by SBS Copolymers

Tensile and Elastocaloric Properties of Natural/Devulcanized Waste Rubber Blends

Optimization of rubber mixture production using a validated technological sequence of methods

Effects of High Shear Stress on the Devulcanization of Ground Tire Rubber in A Twin-Screw Extruder

A Novel Approach for Simulation and Optimization of Rubber Vulcanization

Dynamically vulcanized polylactic acid/natural rubber/waste rubber blends: effect of the rubber content

Waste Ground Rubber Tire Powder/thermoplastic Vulcanizate Blends: Preparation, Characterization, and Compatibility