Abstract:In this paper, vertical cavity surface emitting laser (VCSEL) array is used to establish gigabitssecond (Gbps) optical uplink, device-to-device (D2D), and Internet-of-thing (IoT) links, as a supplementary for visible light communication (VLC) and ultra-low latency near-field communication in a typical indoor scenario. The mathematical model based on a modified Monte-Carlo ray-tracing (MMCR) algorithm for VCSEL-based optical wireless communication (OWC) is presented, which takes into account both accuracy and time complexity for the calculation of the channel characteristics including power distribution, impulse response, error analysis, and signal-to-noise ratio (SNR). Simulation firstly takes a global approach to the optical uplink lens design method, compared between Lambertian and Gaussian sources, and then extended six typical line-of-sight (LOS) or non-line-of-sight (NLOS) VCSEL-based OWC models. For demonstration, we adopted a 940-nm VCSEL array and 850-nm single-pixel VCSEL to establish LOS and NLOS systems after measuring the optics-electronics and bandwidth characteristics, respectively. Furthermore, multiple multi-carrier schemes are adopted to improve the OWC performance system based on a 940-nm VCSEL array including uniform-loading orthogonal frequency division multiplexing (OFDM), channel-coded OFDM, bit-loading power-allocation OFDM, and OFDM access (OFDMA). Results show that OFDM can effectively decrease the inter-symbol interference (ISI) of the indoor channel and increase the data rate, and the bit power-loading method achieves the highest 7.2 Gbps transmission with the bit error rate (BER) within the forward error correction (FEC). All the theoretical and experimental results, for the first time, provide a comprehensive design and optimizing process of VCSEL-based indoor high-capacity OWC systems for future optical uplink, D2D, and IoT applications.

Establishing equivalent circuits of mounted, high-power VCSEL arrays for iToF cameras

Exploring Mid-IR FSO Communications with Unipolar Quantum Optoelectronics

Equivalent Photoconductive Time-Domain Sampling for Monitoring High-Speed Terahertz Communication Signals

Range extended SP-iToF LiDAR with time-gated and spatially fused imaging

Optical Uplink, D2D and IoT Links Based on VCSEL Array: Analysis and Demonstration

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

Development of Visible-Light Optical Simulator Based on Liquid Crystal on Silicon Technology

Towards Zero-power 3D Imaging: VLC-assisted Passive ToF Sensing

Compensation schemes for uneven illumination and LED light-emitting instability in optical camera communication system

High-power 910 Nm Vertical-Cavity Surface-Emitting Laser Arrays for Light Detection and Ranging

Long-distance near-infrared VCSEL wireless optical communication system based on collimating lens design

Full-duplex high-speed indoor optical wireless communication system based on a micro-LED and VCSEL array

All-Monolithically Integrated Self-Scanning Addressable VCSEL Array for 3D Sensing

High-speed 850 nm Vertical-cavity Surface-emitting Lasers with Multilayer Oxide Aperture

Spatial division multiplexing of LED strips for optical camera communication

SiN-on-SOI Optical Phased Array LiDAR for Ultra-Wide Field of View and 4D Sensing

A Two-Tap Indirect Time-of-Flight CMOS Image Sensor With Pump Gate Modulator for Low-Power Applications

High-speed Multi-User Optical Wireless Communication Between VCSEL-integrated Electronic Devices

Circuit Models Applied to the Design of a Novel Uncooled Infrared Focal Plane Array Structure

910 Nm Vertical-Cavity Surface-Emitting Laser Arrays With 100w Output Power Level And Low Driving Current

Simultaneous Multifrequency Demodulation for Single-Shot Multiple-Path ToF Imaging