Abstract:A blast furnace operates under a countercurrent flow process, and a wide variety of physical and chemical reactions take place, especially in the hearth at the highest temperature. Therefore, the working status and erosion of the carbon brick have a critical influence on the longevity of the blast furnace. Although the phenomena in the hearth cannot be directly observed through the black box, hearth dissection provides an alternative way to access and subsequently evaluate the internal conditions. In this paper, a 4000 m3 blast furnace hearth was dissected, and 12 residual iron samples were collected and subjected to composition, morphology, and thermal conductivity analyses. The results show that in the center of the hearth, the residual iron had thicker metallic iron strips. This is because the residual iron in the center of the dissected hearth was fully mixed with carbon or coke, and this mixing apparently enhanced the heat conductivity in the center of the hearth to as great as 80.5 W/(m K). However, such a mixing state was gradually relieved in the regions either close to the wall or settling on the bottom. Thus, the residual iron near the wall formed a needle-like surface with a layer-by-layer structure in the form of alternatively thinner strip-shaped carbon and metallic iron, and the thermal conductivities of the residual iron near the wall were above 40.0 W/(m K) regardless of the relative height. Moreover, the erosion mechanisms of the blast furnace hearth wall are proposed, and the erosion thickness is accordingly evaluated based on the heat transfer model, in which the measured thermal conductivities of the residual iron are taken into consideration. According to the erosion mechanism, the thickness of residual iron is thinner, the erosion is more serious.

Design of Intelligent Monitoring System for Blast Furnace Hearth Erosion

Nonstationary Process Monitoring for Blast Furnaces Based on Consistent Trend Feature Analysis

Mathematical Model of Hearth and Bottom Erosion in Blast Furnace

Research of blast furnace intelligent production system

Improved Optimization Method for Blast Furnace Based on Robust Soft Sensor and Process Knowledge

Data/mechanism Hybrid-Driven Modeling of Blast Furnace Smelting System and Global Sequential Optimization

Real-time Blast Furnace Monitoring Based on Temporal Sub-mode Recognition

Numerical Simulation Model for Evaluating Protection Measures of Blast Furnace Hearth

Investigation of the Hearth Erosion of WISCO No. 1 Blast Furnace Based on the Numerical Analysis of Iron Flow and Heat Transfer in the Hearth

Thermofluid-Solid Coupling Numerical Simulation Model of Blast Furnace Hearth Protection Measures.

Thermal Stress Analysis of Blast Furnace Hearth with Typical Erosion Based on Thermal Fluid-Solid Coupling

Numerical Simulation of Blast Furnace Hearth Maintenance Measures

Monitoring of Blast Furnace Hearth Erosion

Estimation of the Blast Furnace Hearth State Using an Inverse-Problem-Based Wear Model

Influence of the Residual Iron on the Erosion of Carbon Bricks in a 4000 m3 Blast Furnace Hearth: From the Measured Properties to the Proposed Mechanisms

Erosion Behavior and Longevity Technologies of Refractory Linings in Blast Furnaces for Ironmaking: A Review

Numerical Analysis on Erosion and Optimization of a Blast Furnace Main Trough

Measurement of erosion state and refractory lining thickness of blast furnace hearth by using three-dimensional laser scanning method

Intelligent Monitoring of Blast Furnace Stave Hot Surface Status

Data-driven Soft Sensors in Blast Furnace Ironmaking:A Survey

Detection of Blast Furnace Hearth Lining Erosion by Multi-Information Fusion