Abstract:Lithium metal anodes are prone to non-uniform lithium plating that can lead to dendrite formation, internal short circuits, and catastrophic ignition. This type of structural defect is not captured by battery management systems, prompting the need to advance nondestructive evaluation (NDE) techniques that are suitable for periodic monitoring of the internal structure. An ultrasonic inspection technique is evaluated here as a means of identifying flaws and irregular lithium plating that can be a precursor to dendrite formation and, ultimately, battery failure. Lithium metal pouch cell batteries were aged through electrochemical cycling at a range of moderate constant-current charging and discharging rates. They were inspected intermittently using a tailored local ultrasonic resonance spectroscopy (LURS) approach that measures the local through-thickness resonances of the battery as an indicator of the underlying structure. LURS results showed clear structural resonances in cells in the range of 3–7 MHz, which shifted significantly to lower frequencies as batteries aged. In addition to point measurements, scanning LURS measurements were implemented to map resonance frequencies over the electrode surface. These resonance maps revealed spatial variations in structure that developed during aging and showed better contrast to structural variation than achieved using conventional amplitude-based c-scans of the specimens. NDE results from pouch cell measurements were compared to a destructive physical analysis of the electrode structures using scanning electron microscopy (SEM). The SEM results showed differences in the end-of-life lithium anode structure at different charge rates. The results of this study show the capability of LURS as a means for identifying changes in battery structures during aging and establish resonance trends that may be applied in future work for prognostic modeling of batteries in service.

Ultrasonic diagnosis of the nonlinear aging characteristics of lithium-ion battery under high-rate discharge conditions

Ultrasonic Non-Destructive Testing on Fast-Charging Lithium-Ion Battery's Capacity Fading

Application of Machine Learning in Ultrasonic Diagnostics for Prismatic Lithium-Ion Battery Degradation Evaluation

Cyclic aging monitoring of lithium-ion battery based on acoustic emission

Advances in acoustic techniques for evaluating defects and properties in lithium-ion batteries: A review

Ultrasonic assessment of aging in lithium metal pouch cells

A robust ultrasonic characterization methodology for lithium-ion batteries on frequency-domain damping analysis

Ultrasonic Nondestructive Diagnosis of Cylindrical Batteries Under Various Charging Rates

Progress and challenges in ultrasonic technology for state estimation and defect detection of lithium-ion batteries

Ultrasonic inspection of pouch-type lithium-ion batteries: a review

Understanding of Lithium-ion battery degradation using multisine-based nonlinear characterization method

Noninvasive ultrasound for Lithium-ion batteries state estimation

Acoustic Emission Detection and Analysis Method for Health Status of Lithium Ion Batteries

Aging mechanism diagnosis of lithium ion battery by open circuit voltage analysis

A Method of Lithium-Ion Battery Failure Diagnosis Based on Parameter Boundaries of Heterogeneous Multi-Physics Aging Model

Remaining capacity prediction of Li-ion batteries based on ultrasonic signals

State-of-charge and state-of-health estimation for lithium-ion battery using the direct wave signals of guided wave

Acoustic Response Characteristics of Lithium Cobaltate/Graphite Battery during Cycling

In-situ Detection of Electrolyte Defects in Lithium-Ion Batteries Using Ultrasonic Imaging and Analysis of Formation Patterns

Integrating Physics-Based Modeling and Machine Learning for Degradation Diagnostics of Lithium-Ion Batteries

Estimating State of Charge of Lithium-ion Batteries by Using Ultrasonic Guided Waves Detection Technology