Abstract:As one of the commonly-used solid dosage forms, pharmaceutical tablets have been widely used to deliver active drugs into the human body, satisfying patient’s therapeutic requirements. To manufacture tablets of good quality, diluent powders are generally used in formulation development to increase the bulk of formulations and to bind other inactive ingredients with the active pharmaceutical ingredients (APIs). For formulations of a low API dose, the drug products generally consist of a large fraction of diluent powders. Hence, the attributes of diluents become extremely important and can significantly influence the final product property. Therefore, it is essential to accurately characterise the mechanical properties of the diluents and to thoroughly understand how their mechanical properties affect the manufacturing performance and properties of the final products, which will build a sound scientific basis for formulation design and product development. In this study, a comprehensive evaluation of the mechanical properties of the widely-used pharmaceutical diluent powders, including microcrystalline cellulose (MCC) powders with different grades (i.e., Avicel PH 101, Avicel PH 102, and DG), mannitol SD 100, lactose monohydrate, and dibasic calcium phosphate, were performed. The powder compressibility was assessed with Heckel and Kawakita analyses. The material elastic recovery during decompression and in storage was investigated through monitoring the change in the dimensions of the compressed tablets over time. The powder hygroscopicity was also evaluated to examine the water absorption ability of powders from the surroundings. It was shown that the MCC tablets exhibited continuous volume expansion after ejection, which is believed to be induced by (1) water absorption from the surrounding, and (2) elastic recovery. However, mannitol tablets showed volume expansion immediately after ejection, followed by the material shrinkage in storage. It is anticipated that the expansion was induced by elastic recovery to a limited extent, while the shrinkage was primarily due to the solidification during storage. It was also found that, for all powders considered, the powder compressibility and the elastic recovery depended significantly on the particle breakage tendency: a decrease in the particle breakage tendency led to a slight decrease in the powder compressibility and a significant drop in immediate elastic recovery. This implies that the particle breakage tendency is a critical material attribute in controlling the compression behaviour of pharmaceutical powders.

A modified Kushner-Moore approach to characterising small-scale blender performance impact on tablet compaction

Demonstrating scalability between two blender types using DEM

Exploring Pharmaceutical Powder Behavior in Commercial-Scale Bin Blending: A DEM Simulation Study

Process intensification of pharmaceutical powder blending at commercial throughputs by utilizing semi-continuous mini-blending

The influence of direct compression powder blend transfer method from the container to the tablet press on product critical quality attributes: a case study

Small-Scale Modeling of Pharmaceutical Powder Compression from Tap Density Testers, to Roller Compactors, and to the Tablet Press Using Big Data

Continuous direct compression: Development of an empirical predictive model and challenges regarding PAT implementation

Predicting tablet properties using In-Line measurements and evolutionary equation Discovery: A high shear wet granulation study

Flexible modelling of the dissolution performance of directly compressed tablets

The impacts of roller compaction on the quality attributes of simultaneously compressed micro and minitablets

Quantification of lubrication and particle size distribution effects on tensile strength and stiffness of tablets

Using in-line measurement and statistical analyses to predict tablet properties compressed using a Styl'One compaction simulator: A high shear wet granulation study

Modeling of Styl'One Evolution correction factors for multicomponent mixtures scaling-up to roller compaction

The effect of excipient particle size on the reduction of compactibility after roller compaction

Modeling and Optimization of a Tablet Manufacturing Line

Impact of Mixing on Content Uniformity of Thin Polymer Films Containing Drug Micro-Doses

Critical Tools in Tableting Research: Using Compaction Simulator and Quality by Design (QbD) to Evaluate Lubricants’ Effect in Direct Compressible Formulation

On Identification of Critical Material Attributes for Compression Behaviour of Pharmaceutical Diluent Powders

In-line monitoring of compaction properties on a rotary tablet press during tablet manufacturing of hot-melt extruded amorphous solid dispersions

Semicontinuous Blending of Pharmaceutical Ingredients and the Impact of Process Parameters on the Blending Performance of an Integrated Feeder Blender Operating Semicontinuously

How can the heterogeneous distribution of a component in low concentration in the mixture at the radial surface of a tablet modify the mechanical properties of a tablet?