Ferromagnetic Metal Particle Detection Including Calculation of Particle Magnetic Permeability Based on Micro Inductive Sensor

Yu Wu,Chao Yang

DOI: https://doi.org/10.1109/jsen.2020.3014799

IF: 4.3

2021-01-01

IEEE Sensors Journal

Abstract:As the working medium of machine, lubrication oil system is a very important component, which can be used to judge the operating conditions of machine, moreover, lubricating oil detection can eliminate the need for costly machine shutdowns for inspection. Metal particle is the most important parameter in lubrication oil detection. Inductance detection is one of the commonly used metal particle detection methods, with the development of micro fabrication technology, which can measure the sizes of metal particles and count the particles. In this paper, the model of ferromagnetic metal particle detection is established based on micro inductive sensor. It is obtained that the inductance change rate is proportional to the magnetic permeability of the metal particle and the cube of the particle size of metal particle. The tests about the metal particles with five different diameters are carried out, it is obtained that the theoretical values are in good agreement with the experimental values, the relative errors are less than 9.47%. And combined with experimental research, the magnetic permeability of ferromagnetic metal particles $mu ,,3.907times 10^{4}$ H/m, $4.246times 10^{4}$ H/m, $4.092times 10^{4}$ H/m, $3.718times 10^{4}$ H/m, $4.07times 10^{4}$ H/m and $4.4289times 10^{4}$ H/m is obtained when the radii of particles are $25~mu text{m}$ , $50~mu text{m}$ , $100~mu text{m}$ , $200~mu text{m}$ , $500~mu text{m}$ and 1 mm, the relative errors ${E}_{text{r}}=vert 1- mu {/} mu _{text{AVG}} vert $ are less than 8.82%.

engineering, electrical & electronic,instruments & instrumentation,physics, applied

What problem does this paper attempt to address?

The problem this paper attempts to address is to improve the detection accuracy and efficiency of metal particles in lubrication systems by establishing a detection model for ferromagnetic metal particles based on micro-inductance sensors. Specifically, the objectives of the paper include:

1. **Establishing a theoretical model**: Using electromagnetic theory, establish a mathematical model of the inductance change caused by ferromagnetic metal particles passing through a micro-inductance sensor. This model can describe the relationship between the rate of inductance change and the magnetic permeability and size of the metal particles.

2. **Experimental verification**: Through experimental testing of ferromagnetic metal particles of different diameters (25 μm, 50 μm, 100 μm, 200 μm, 500 μm, and 1 mm) causing inductance changes in the coil when passing through a microchannel, verify the accuracy of the theoretical model.

3. **Calculating magnetic permeability**: Combine experimental data to calculate the magnetic permeability of ferromagnetic metal particles of different sizes and analyze their relative errors to evaluate the reliability and accuracy of the model.

Through these objectives, the paper aims to provide a fast, accurate, and cost-effective online detection method for health monitoring of lubrication systems, thereby reducing downtime and maintenance costs caused by mechanical failures.