Abstract:The online monitoring of metal particles in lubricating oil plays an important role in equipment fault diagnosis technology. This paper designs an online wear monitoring warning sensor based on the electromagnetic induction of metal particles in lubricating oil. First, different from the traditional three-coil sensing and detection method, the sensor consists of two excitation coils and one detection coil. In addition, the parallel capacitance and detection capacitance parameters are obtained by COMSOL’s scanning frequency, and the best detection capacitance is 7.53 nF. Second, according to the obtained optimal detection parallel capacitance value, the amplitude data of the particle signal, as well as the ferromagnetic particles above 60 μm and the non-ferromagnetic particles above 80 μm, are obtained. Third, according to the principle of three-coil induction, a mapping relationship model was established between the size range of metal wear particles in lubricating oil. Finally, we set up an oil wear particle platform to verify the sensor performance. The ferromagnetic and non-ferromagnetic particles are divided into multiple size ranges, and the peak-to-peak values of the output signal of different-sized wear particles are measured. We developed a prototype sensor and verified the signal consistency and repeatability of the sensor to wear metal particles. In addition, we used the sensor to test a large number of metal particles of different sizes (14 ferromagnetic particle standard samples with particle sizes ranging from 20.64 to 457.59 μm and ten non-ferromagnetic particle standard samples with particle sizes ranging from 40.52 to 348.07 μm). The experimental results show that the sensor can directly achieve monitoring sensitivity for ferromagnetic particles greater than 64.57 μm and non-ferromagnetic (copper) particles greater than 82.83 μm under the 4.2 mm aperture flow channel. The sensor can effectively realize the sensitivity on monitoring of small ferromagnetic particles and non-ferromagnetic particles, and it is particularly sensitive to small non-ferromagnetic particles.

Study on a High Sensitive Online Sensor for Wear Particles in Lubricant

An online wear metal particles monitoring warning sensor based on electromagnetic induction in lubricating oil

Design and experimental research of abrasive particle detection sensor based on coil magnetic field

Research on High Sensitivity Oil Debris Detection Sensor Using High Magnetic Permeability Material and Coil Mutual Inductance

Research on Online Synchronous Sensing Method for Debris and Moisture in Lubricating Oil

The Design and Study of a Four-Coil Oil Multi-Pollutant Detection Sensor

Online Symmetric Magnetic Excitation Monitoring Sensor for Metal Wear Debris

A Method for Measurement of Nonferrous Particles Sizes in Lubricant Oil Independent of Materials Using Inductive Sensor

A high sensitivity wear debris sensor using ferrite cores for online oil condition monitoring

Electromagnetic Sensor for Detecting Wear Debris in Lubricating Oil

High-sensitivity distinguishing and detection method for wear debris in oil of marine machinery

Inductive Magnetic Nanoparticle Sensor based on Microfluidic Chip Oil Detection Technology

Capacitive–Inductive Magnetic Plug Sensor With High Adaptability for Online Debris Monitoring

Characterization of Abrasive Grain Signal of Oil Detection Sensor Based on LC Resonance Wireless Transmission

Study on oil detection technology based on inductive wear debris sensor

A high throughput inductive pulse sensor for online oil debris monitoring

An Impedance Sensor for Distinguishing Multi-Contaminants in Hydraulic Oil of Offshore Machinery

Research on an on-line wear condition monitoring system for marine diesel engine

Simulation and Optimization Design of Inductive Wear Particle Sensor

Monitoring of Non-Ferrous Wear Debris in Hydraulic Oil by Detecting the Equivalent Resistance of Inductive Sensors

Applications of Electrostatic Sensor for Wear Debris Detecting in the Lubricating Oil