Fabrication of Lead–Zinc Tailings Sintered Brick and Its Effect Factors Based on an Orthogonal Experiment

Hang Lin,Rui Li,Su Li
DOI: https://doi.org/10.3390/ma17102352
IF: 3.4
2024-05-16
Materials
Abstract:The existence of lead-zinc tailings threatens the social and ecological environment. The recycling of lead–zinc tailings is important for the all-round green transformation of economic society. In this study, the possibility of fabricating sintered ordinary bricks with lead–zinc tailings was studied based on orthogonal experimentation, and the phase composition and micromorphology of sintered products were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). With lead–zinc tailings as the main material, and clay and fly ash as additives, the effect of clay content, forming pressure, sintering temperature, and holding time on physical properties of sintered bricks was analyzed. The results show that clay content and sintering temperature have a major effect on compressive strength, while sintering temperature and holding time play an important role in water absorption. During sintering, mica, chlorite, and other components in lead–zinc tailings are decomposed to form albite, hematite, maghemite, and anhydrite, which play a role in the strength of bricks. The optimal process parameters were found to be a ratio of lead–zinc tailings:clay:fly ash = 6:3:1, forming pressure of 20 MPa, firing temperature of 1080 °C, and holding time of 60 min. The corresponding compressive strength and water absorption were 34.94 MPa and 16.02%, which meets the Chinese sintered ordinary bricks standard (GB/T 5101-2017).
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
What problem does this paper attempt to address?
The paper attempts to address the issue of recycling lead-zinc tailings. Specifically, the researchers aim to explore the possibility of using lead-zinc tailings to prepare sintered bricks through orthogonal experimental methods and analyze various factors affecting the performance of sintered bricks (such as clay content, forming pressure, sintering temperature, and holding time). Through this study, the goal is to achieve the secondary utilization of lead-zinc tailings, reduce their environmental and safety threats, and provide new avenues for the comprehensive utilization of lead-zinc tailings. The main objectives of the paper include: 1. **Assessing the feasibility of using lead-zinc tailings as raw materials for sintered bricks**: Investigating the phase composition and microstructure changes of lead-zinc tailings during the preparation of sintered bricks. 2. **Optimizing the preparation process of sintered bricks**: Determining the optimal process parameters such as clay content, forming pressure, sintering temperature, and holding time through orthogonal experiments. 3. **Analyzing the physical properties of sintered bricks**: Focusing on the compressive strength and water absorption rate of sintered bricks to ensure they meet the requirements of the Chinese standard for sintered common bricks (GB/T 5101-2017). Through these studies, the paper hopes to provide scientific basis and technical support for the resource utilization of lead-zinc tailings, promoting a comprehensive green transformation of the economy and society.