Abstract:In situ co‐exsolution of both FeNi alloy and PrOx nanoparticles on the reduced Pr0.8Sr1.2Fe1.5Mo0.3Ni0.2O6‐δ (R‐PSFMN) perovskite are successfully obtained, and the catalytic activity and stability of SOFC are significantly improved. Sr2Fe1.5Mo0.5O6‐δ (SFM) perovskite oxide is one of the most promising materials for solid oxide fuel cells (SOFCs) anode. However, the low catalytic activity is a major roadblock that obstructs its practical applications. Although in situ exsolution of B‐site metals is demonstrated as a promising approach to enhancing its performance, it can easily induce the co‐segregation of A‐site Sr, which seriously deteriorates the performance stability. In this work, the A‐site Sr element in SFM is partially replaced by Pr, while B‐site Mo is partially replaced by Ni. The in situ co‐exsolution of both FeNi alloy and PrOx nanoparticles on the reduced Pr0.8Sr1.2Fe1.5Mo0.3Ni0.2O6‐δ (R‐PSFMN) perovskite is successfully achieved. It is found that the peak power densities (Pmax) of the single cell using R‐PSFMN as the anode reaches as high as 2.29, 1.60, 1.07, and 0.67 W cm−2 in H2 atmosphere at the operating temperatures of 850, 800, 750 and 700 °C, respectively. Furthermore, it also exhibits excellent performance stability and anticoke properties when using ethane as fuel. The impregnation experiment further corroborates that the improved performance and stability are partly attributable to the contribution of PrOx nanoparticles, presenting a promising approach to enhance the electrochemical performance of SOFC perovskite anodes.

Medium-Entropy SrV1/3Fe1/3Mo1/3O3 with High Conductivity and Strong Stability as SOFCs High-Performance Anode

Pd-impregnated Sr1.9VMoO6– Double Perovskite As an Efficient and Stable Anode for Solid-Oxide Fuel Cells Operating on Sulfur-Containing Syngas

B-Site Super-Excess Design Sr 2 V 0.4 Fe 0.9 Mo 0.7 O 6-δ -Ni 0.4 as a Highly Active and Redox-Stable Solid Oxide Fuel Cell Anode

Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6-delta for Solid Oxide Fuel Cells

Boosting the Performance and Stability of Perovskites by Construction of NiFe Alloy and PrOx Heterogeneously Structured Composites for High‐Performance Solid Oxide Fuel Cell Anode

High Performance Ferrite–based Anode La0.5Sr0.5Fe0.9Mo0.1O3–δ for Intermediate–temperature Solid Oxide Fuel Cell

Novel, Cobalt-Free, and Highly Active Sr2Fe1.5Mo0.5−xSnxO6−δ Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

A Redox-Stable Direct-Methane Solid Oxide Fuel Cell (SOFC) with Sr2FeNb0.2Mo0.8O6−δ Double Perovskite As Anode Material

Effects of high-valence Mo content on microstructure and properties of Ba2Fe2-Mo O6- anode materials for solid oxide fuel cells

Effects of High-Valence Mo Content on Microstructure and Properties of Ba2Fe2-xMoxO6-δ Anode Materials for Solid Oxide Fuel Cells

Highly carbon– and sulfur–tolerant Sr2TiMoO6−δ double perovskite anode for solid oxide fuel cells

Sr2CoMoO6 anode for solid oxide fuel cell running on H2 and CH4 fuels

Novel architectured metal-supported solid oxide fuel cells with Mo-doped SrFeO3−δ electrocatalysts

Mo-Doped LSCF as a Novel Coke-Resistant Anode for Biofuel-Fed SOFC

Mo Doped Pr 0.4 Sr 0.6 Co 0.2 Fe 0.8 O 3-Δ Cathode Material with High Catalytic Activity for Intermediate-Temperature Solid Oxide Fuel Cells

Sulfur Tolerant Redox Stable Layered Perovskite SrLaFeO4 − Δ As Anode for Solid Oxide Fuel Cells

Mo-doped Pr0.6Sr0.4Fe0.8Ni0.2O3-δ As Potential Electrodes for Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells

Sr- and Mo-deficiency Sr1.95TiMo1−O6– double perovskites as anodes for solid-oxide fuel cells using H2S-containing syngas

High-performance SOFCs with Impregnated Sr2Fe1.5Mo0.5O6-δ Anodes Toward Sulfur Resistance

A highly active and carbon-tolerant anode decorated with in situ grown cobalt nano-catalyst for intermediate-temperature solid oxide fuel cells