Abstract:Electrochemical exfoliation starting with graphite powder as the raw material for graphene production shows superiority in cost effectiveness over the popular bulk graphite. However, the crucial conductive network inside the graphite powder electrode along with its formation and influence mechanisms remains blank. Here, an adjustable-pressure graphite powder electrode with a sandwich structure was designed for this. Appropriate encapsulation pressure is necessary and conducive to constructing a continuous and stable conductive network, but overloaded encapsulation pressure is detrimental to the exfoliation and graphene quality. With an initial encapsulation pressure (IEP) of 4 kPa, the graphite powders expand rapidly to a final stable expansion pressure of 49 kPa with a final graphene yield of 46.3%, where 84% of the graphene sheets are less than 4 layers with ID/IG values between 0.22 and 1.24. Increasing the IEP to 52 kPa, the expansion pressure increases to 73 kPa, but the graphene yield decreases to 39.3% with a worse graphene quality including higher layers and ID/IG values of 1.68-2.13. In addition, small-size graphite powders are not suitable for the electrochemical exfoliation. With the particle size decreasing from 50 to 325 mesh, the graphene yield decreases almost linearly from 46.3% to 5.5%. Conductive network and electrolyte migration synergize and constrain each other, codetermining the electrochemical exfoliation. Within an encapsulated structure, the electrochemical exfoliation of the graphite powder electrode proceeds from the outside to the inside. The insights revealed here will provide direction for further development of electrochemical exfoliation of graphite powder to produce graphene.

Delocalized electrochemical exfoliation toward high-throughput fabrication of high-quality graphene

Graphene: Simultaneous Electrochemical Dual‐Electrode Exfoliation of Graphite Toward Scalable Production of High‐Quality Graphene (adv. Funct. Mater. 37/2019)

Construction of Three-Dimensional Conductive Graphitic Architecture by Highly Efficient Electrochemical Exfoliation

Scalable production of electrochemically exfoliated graphene by an extensible electrochemical reactor with encapsulated anode and dual cathodes

Eco-friendly non-acid intercalation and exfoliation of graphite to graphene nanosheets in the binary-peroxidant system for EMI shielding

Highly efficient dual-electrode exfoliation of graphite into high-quality graphene via square-wave alternating currents

Synthesis of high-quality graphene by electrochemical anodic and cathodic co-exfoliation method

Regulating cations and solvents of the electrolyte for ultra-efficient electrochemical production of high-quality graphene

Insights into the Conductive Network of Electrochemical Exfoliation with Graphite Powder as Starting Raw Material for Graphene Production

High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation

Ultrafast Alternating-Current Exfoliation Toward Large-Scale Synthesis of Graphene and Its Application for Flexible Supercapacitors.

Repeated microwave-assisted exfoliation of expandable graphite for the preparation of large scale and high quality multi-layer graphene

Producing Bilayer Graphene Oxide via Wedge Ion-Assisted Anodic Exfoliation: Implications for Energy and Electronics

Electrochemical exfoliation of 2D materials beyond graphene

Preparation of colloidal graphene in quantity by electrochemical exfoliation

Preparation of Pristine Graphene Sheets and Large-Area/ultrathin Graphene Films for High Conducting and Transparent Applications

Supercritical CO2-assisted microfluidization as ultra-high efficiency strategy for graphene preparation

Electrolyte engineering for the mass exfoliation of graphene oxide across wide oxidation degrees

Electrochemical exfoliation of graphite in H<sub>2</sub>SO<sub>4</sub>, Li<sub>2</sub>SO<sub>4</sub> and NaClO<sub>4</sub> solutions monitored <i>in situ</i> by Raman microscopy and spectroscopy

Clean and Efficient Transfer of CVD-grown Graphene by Electrochemical Etching of Metal Substrate

Efficient coupling of nanoparticles to electrochemically exfoliated graphene.