Abstract:A proof-of-concept gas sensor based on a miniaturized and integrated fiber-optic photoacoustic detection module was introduced and demonstrated for the purpose of developing a custom tuning-fork (TF)-enhanced photoacoustic gas sensor. Instead of piezoelectric quartz tuning fork (QTF) in conventional quartz-enhanced photoacoustic spectroscopy (QEPAS), a low-cost custom aluminum alloy TF fabricated by mechanical processing was employed as a photoacoustic transducer and the vibration of TF was measured by fiber-optic Fabry-Pérot (FP) interferometer (FPI). The mechanical processing-based TF design scheme greatly increases the flexibility of the TF design with respect to the complex and expensive manufacture process of custom QTFs, and thus it can be better exploited to detect gases with slow vibrational-translational (V-T) relaxation rates and combine with light sources with poor beam quality. The resonance frequency and the quality factor of the designed custom TF at atmospheric pressure were experimentally determined to be 7.3 kHz and 4733, respectively. Dual-prong differential measurement method was proposed to double the photoacoustic signal and suppress the external same-direction noise. After detailed optimizing and investigating for the operating parameters by measuring H2O, the feasibility of the developed sensor for gas detection was demonstrated with a H2O minimum detection limit (MDL) of 1.2 ppm, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 3.8 × 10-8 cm-1 W/Hz1/2, which are better than the QTF-based photoacoustic sensors. The proposed gas sensing approach combined the advantages of QEPAS and fiber-optic sensing, which can greatly expand the application domains of PAS-based gas sensors.

Quartz-enhanced photoacoustic spectroscopy sensing using trapezoidal- and round-head quartz tuning forks

High Quality-Factor Quartz Tuning Fork Glass Probe Used In Tapping Mode Atomic Force Microscopy For Surface Profile Measurement

Improved T-shaped quartz tuning fork with isosceles-trapezoidal grooves optimized for quartz-enhanced photoacoustic spectroscopy

Quartz-Enhanced Photoacoustic Spectroscopic Co2 Sensor System Using a Quartz Tuning Fork-Embedded and In-Plane Configuration

Application of standard and custom quartz tuning forks for quartz-enhanced photoacoustic spectroscopy gas sensing

Quartz tuning forks resonance frequency matching for laser spectroscopy sensing

Miniature quartz tuning fork based light-induced thermoelastic spectroscopy sensing

First Overtone Frequency Stimulated Quartz Tuning Fork Used For Shear-Force Scanning Near-Field Optical Microscopy

Harmonic phase-sensitive detection for quartz-enhanced photoacoustic-thermoelastic spectroscopy

Equivalent Electromechanical Model for Quartz Tuning Fork Used in Atomic Force Microscopy

Calibration of the oscillation amplitude of quartz tuning fork-based force sensors with astigmatic displacement microscopy

Eigenmodes of a quartz tuning fork and their application to photo-induced force microscopy

Sensing Performance Analysis on Quartz Tuning Fork-Probe at the High Order Vibration Mode for Multi-Frequency Scanning Probe Microscopy.

Off-plane quartz-enhanced photoacoustic spectroscopy

Folded-optics-based quartz-enhanced photoacoustic and photothermal hybrid spectroscopy

T-shape microresonator-based high sensitivity quartz-enhanced photoacoustic spectroscopy sensor

Micro-Quartz Crystal Tuning Fork-Based Photodetector Array for Trace Gas Detection

Ppb-level gas detection using on-beam quartz-enhanced photoacoustic spectroscopy based on a 28 kHz tuning fork

Micro quartz crystal tuning fork based photothermal spectroscopy for trace gas detection

Miniaturized and highly-sensitive fiber-optic photoacoustic gas sensor based on an integrated tuning fork by mechanical processing with dual-prong differential measurement

Quartz-Enhanced Photoacoustic Spectroscopy: A Review