Abstract:Ti6Al4V Voronoi structures are unique lattice structures with high potential in biomedical applications, owing to their tuneable mechanical properties and superior biocompatibility. Unlike unit cell-based lattice structures, Voronoi structures have struts that are oriented in any direction relative to the build direction, which impedes process optimisation and increases the risk of internal and structural defects. Previous research has primarily focused on the mechanical properties of porous Voronoi structures with limited geometric variations. This study aims to address a broader range of geometries and relative densities, parameters that are important for orthopaedic implants. This work examines the influence of process parameters and scan strategies on both geometric accuracy and internal defects of Voronoi structures. Additionally, the deformation behaviour of an extensive geometric range of Voronoi structures is studied using uniaxial compression tests. Voronoi structures of relative density ranging from 54.6% to 98.5% were used in this study. The results show an improvement in geometric accuracy and a reduction in interior defects as a result of adapting the laser powder bed fusion process parameters and carefully controlling the scan strategy. In comparison to a control group of fully dense samples, the Young's modulus of the investigated structures ranged from 35.1% to 97.7%, and the compressive yield stress ranged from 32.8% to 101.1%. These properties exhibit positive power correlations with the relative density. Furthermore, dense Voronoi structures showed similar deformation and failure behaviour to bulk material, while porous Voronoi structures demonstrated an accumulation of local failures. Fractography analysis indicated that failures were mainly caused by local shear stress. The results of this work enhance the manufacturing process and promote applications of Voronoi lattice structures.

Mechanical and microstructural characterization of Ti6Al4V lattice structures with and without solid shell manufactured via electron beam powder bed fusion

Electron beam powder bed fusion of Ti-6Al-2Sn-4Zr-2Mo lattice structures: morphometrical and mechanical characterisations

Microstructure and Mechanical Properties of Ti-6al-4v Components Fabricated by Laser Micro Cladding Deposition

Experimental and Numerical Investigation of Mechanical Properties of Different Lattice Structures Manufactured from Medical Titanium Alloy by Using Laser Beam-Powder Bed Fusion

Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V

Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion

Effects of the manufacturing process on the flexural properties of EBMed lattice structures

Physical-Mechanical Characteristics and Microstructure of Ti6Al7Nb Lattice Structures Manufactured by Selective Laser Melting

Solidification microstructure variations in additively manufactured Ti-6Al-4V using laser powder bed fusion

Compressive properties of imperfect Ti-6Al-4V lattice structure fabricated by electron beam powder bed fusion under static and dynamic loadings

Additively manufactured β-Ti5553 with laser powder bed fusion: microstructures and mechanical properties of bulk and lattice parts

The effects of specimens geometry on solidification conditions and microstructure formation in laser powder bed fusion fabricated Ti–6Al–4V alloys

Investigation of the laser powder bed fusion manufacturing process and quasi-static behaviour of Ti6Al4V Voronoi structures

Electron beam powder bed fusion additive manufacturing of Ti6Al4V alloy lattice structures: orientation-dependent compressive strength and fracture behavior

Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion

Tension-compression asymmetric mechanical behaviour of lattice cellular structures produced by selective laser melting

Impact of Surface Finishing on Ti6Al4V Voronoi Additively Manufactured Structures: Morphology, Dimensional Deviation, and Mechanical Behavior

In-situ investigation into the deformation behavior of Ti-6Al-4V processed by laser powder bed fusion

A detailed analysis on the microstructure and compressive properties of selective laser melted Ti6Al4V lattice structures

Innovative Fabrication Design for In Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy

Laser Powder Bed Fusion of Titanium Aluminides: An Investigation on Site-Specific Microstructure Evolution Mechanism