Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Enhanced droplet formation in a T-junction microchannel using electric field: A lattice Boltzmann study

Lattice Boltzmann Simulation of Droplet Formation in Microchannels under an Electric Field

LBM simulation of droplet formation in micro-channels

Lattice Boltzmann Simulation of Droplet Formation in T-junction and Flow Focusing Devices

Numerical Investigation on Formation Mechanism and Flow Law of Droplet in T-junction by Electric Field

Study of Droplet Formation in Parallel Flow Focusing Microchannel under Electrostatic Field Control

Deformation and Approaching of Droplet Pair in a Microchannel under AC Electric Fields

Simulations of Droplet Formation in A T-Junction Micro-Channel Using the Phase Field Method

Lattice Boltzmann simulation of droplet generation in a microfluidic cross-junction

Numerical Study of Droplet Dynamics in a Steady Electric Field Using a Hybrid Lattice Boltzmann and Finite Volume Method

Droplet Fusion by the Interplay of Electric Potential and Converging–diverging Geometry in Micro‐channels

Electro-hydrodynamics of Droplet Generation in a Co-Flowing Microfluidic Device under Electric Control

Numerical investigation on flow regime transition mechanism and length prediction method of droplet in T-junction by electric field

Three-dimensional Numerical Study on Droplet Formation and Cell Encapsulation Process in a Micro T-junction

Three Dimensional Simulations of Droplet Formation in Symmetric and Asymmetric T-junctions Using the Color-Gradient Lattice Boltzmann Model

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Lattice Boltzmann Simulation of Droplet Behaviour in Microfluidic Devices

Lattice Boltzmann study of droplet dynamic behaviors impinging on textured surfaces under an external electric field

Mechanism for regulation and control of emulsion droplet generation in co-flow microfluidic device via electric field

Numerical Study of Janus Droplet Formation in Microchannels by a Lattice Boltzmann Method

Numerical Study On Liquid Droplet Formation In T-Junction Microchannel