Abstract:Applying the active control of electric field to the preparation of micro-droplets via the traditional microfluidic technology has attracted great attention because it can effectively improve the controllability of the preparing process. Therefore, a full understanding of mechanism for the regulation and control of microdroplets's generation by the microfluidic technology and electric field will provide interesting possibilities for the active control of producing required microdroplets in the practical applications. A transient theoretical model is developed via the coupling of phase-field method and electrostatic model to numerically investigate the generation of the single-phase droplets in a co-flow microfluidic device under the control of a uniform direct-current electric field. Via the numerical simulations based on the transient model, the control mechanisms of the electric field on dynamic behaviors of the droplets generation are revealed, and the influences of flow and electric parameters on the droplets generation characteristics are elucidated. The results indicate that the electrostatic field is able to generate an electric field force toward the inner phase fluid in the normal direction of the interface between two-phase fluids with different electric parameters. The electric field force enhances the necking and breaking of the inner fluid interface, which accelerates the droplets' generation, increases droplet deformation degree, and reduces droplet size. As the electric capillary number increases under the same hydrodynamic capillary number, the droplet formation pattern is transformed from dripping regime with only a single droplet formed per cycle to another dripping regime with one main droplet formed together with the following satellite droplets per cycle. In addition, according to the numerical results in this work, we organize a regime diagram to quantitatively represent the respective regime of these two flow patterns as a function of hydrodynamic capillary number and electric capillary number. The regime diagram indicates that with the increase in hydrodynamic capillary number and electric capillary number, the viscous drag force and electric field force are strengthened, which induces the formation of a slender liquid thread of inner fluid at the later stage of the necking process. This contributes to triggering the Rayleigh-Plateau instability on the liquid thread of inner fluid, and thus facilitating the generation of satellite droplets via the breakup of the liquid thread.

Numerical investigation on flow regime transition mechanism and length prediction method of droplet in T-junction by electric field

Numerical Investigation on Formation Mechanism and Flow Law of Droplet in T-junction by Electric Field

Droplet behavior and its effects on flow characteristics in T-junction microchannels

Numerical Study On Liquid Droplet Formation In T-Junction Microchannel

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Enhanced droplet formation in a T-junction microchannel using electric field: A lattice Boltzmann study

Simulations of Droplet Formation in A T-Junction Micro-Channel Using the Phase Field Method

Modeling of Droplet Traffic in Interconnected Microfluidic Ladder Devices

Numerical and experimental investigation of dripping and jetting flow in a coaxial micro-channel

Numerical Simulation of the Droplet Generation Mode Transition of the Co-Flowing Liquids in Micro-Channel

Electro-hydrodynamics of Droplet Generation in a Co-Flowing Microfluidic Device under Electric Control

Numerical Study of Droplet Dynamics in a Steady Electric Field Using a Hybrid Lattice Boltzmann and Finite Volume Method

Experiment and prediction of droplet formation in microfluidic cross-junctions with different bifurcation angles

Mechanism for regulation and control of emulsion droplet generation in co-flow microfluidic device via electric field

Effects of capillary number and flow rates on the hydrodynamics of droplet generation in T-junction microfluidic systems

Numerical Simulation of Junction Point Pressure During Droplet Formation in a Microfluidic T-junction

Experimental and Simulation Study of Flow Patterns in the Combined Flow Focusing and T-junction Device

Experimental and Numerical Study on the Droplet Formation in A Cross-Flow Microchannel

Experimental Studies of Droplet Formation Process and Length for Liquid–Liquid Two-Phase Flows in a Microchannel

Quantitative Study of the Production Rate of Droplets in a T-junction Microdroplet Generator

Experimental Investigation and Theoretical Prediction of Droplet Breakup under a Combined Electric Field and Shear Flow Field