Abstract:A simple method for the preparation of a three-dimensional (3D) reduced graphene oxide/Fe3O4 (3D-rGO/Fe3O4) hybrid hydrogel was developed via the reduction of graphene oxide by ferrous ions and in situ simultaneous generation of tunable Fe3O4 nanoparticles on graphene sheets. After drying at 50 degrees C for 1 h, its mechanical strength was enhanced according to elastic modulus analysis. The hydrophilic and strength-enhanced hybrid was suitable for the removal of two typical pharmaceuticals including ciprofloxacin (CIP) and tetracycline (TC). Their adsorption kinetics, isotherms, pH and cation effects on 3D-rGO/Fe3O4 were studied. The adsorption capacities of 3D-rGO/Fe3O4 were 2.78 mmol g(-1) for CIP and 4.76 mmol g(-1) for TC according to the Langmuir fitting results, which are much higher than those of commercial granular activated carbons and other graphene-based hydrogels. Moreover, the spent 3D-rGO/Fe3O4 can be easily regenerated by Fenton-like catalytic oxidation with little loss of adsorption capacity after ten adsorption-oxidation cycles. The textural structure and surface functional groups on the adsorbent were hardly changed during the oxidative regeneration process. Benefiting from its superiority, both enhanced adsorption and catalytic degradation of pharmaceuticals were simultaneously achieved using this novel hybrid hydrogel, making it competitive in the removal of micropollutants from water or wastewater. Environmental significance A hydrophilic and strengthened 3D reduced graphene oxide/nano-Fe3O4 hybrid hydrogel was successfully prepared and it exhibited enhanced adsorption and catalytic oxidation of typical pharmaceuticals in water. This study provided a new strategy for the preparation of a graphene oxide-based granular adsorbent with high adsorption of micropollutants in water, and in particular, the loaded nano-Fe3O4 nanoparticles may catalytically oxidize the adsorbed pollutants in the regeneration process, achieving a combination of enhanced adsorption and in situ catalytic degradation of micropollutants on the hybrid adsorbent. This 3D-rGO/Fe3O4 adsorbent shows promising application for the removal of micropollutants from water or wastewater.

Three-dimensional recyclable FeS2/reduced graphene oxide aerogel with high porosity reticulated structure for efficient removal of tylosin tartrate

Reduced Graphene Oxide-Coated CuFeO2 with Fenton-like Catalytic Degradation Performance for Terramycin

Multi-catalysis of glow discharge plasma coupled with FeS 2 for synergistic removal of antibiotic

Removal of sulfamethazine antibiotics using CeFe-graphene nanocomposite as catalyst by Fenton-like process

Highly Efficient Elimination Performance of Graphene/supramolecular Porphyrin-Based Photocatalysis-Self-fenton System Towards Sulfonamide Antibiotics, Resistant Bacteria and Resistance Genes

Efficient Removal of Tetracycline from Aqueous Media with a Fe3O4 Nanoparticles@graphene Oxide Nanosheets Assembly

Highly dispersed natural Goethite/Fe 3 O 4 heterogeneous Fenton-like catalyst for efficient tetracycline degradation: Rapid accumulation of hydroxyl radicals by Fe–O–Si bonds

High stable photo-Fenton-like catalyst of FeP/Fe single atom-graphene oxide for long-term antibiotic tetracycline removal

Mechanochemical synthesis of sulfidated microscale zerovalent iron/graphene composite for enhanced degradation of tetracycline

Fabrication of novel FeS2 NWs/Ti3C2 cathode for Photo-Electro-Fenton degradation of sulfamethazine

Hydrophilic and strengthened 3D reduced graphene oxide/nano-Fe3O4 hybrid hydrogel for enhanced adsorption and catalytic oxidation of typical pharmaceuticals

Degradation of Oxytetracycline Hydrochloride Using Photocatalysis in the Presence of Fe3O4/rGO/Co-doped ZnO/g-C3N4 Nanocomposite Particles: Experiment, Modeling, Optimization and Mechanistic Evaluation

Degradation of Tetracycline in Polluted Wastewater by Persulfate over Copper Alginate/Graphene Oxide Composites

Fabrication of magnetic Fe3O4@SiO2@Bi2O2CO3/rGO composite for enhancing its photocatalytic performance for organic dyes and recyclability

Efficient under visible catalysts from electrospun flexible Ag2S/TiO2 composite fiber membrane

Enabling highly concentrated tetracycline degradation with tailored FeCo nanocrystals in porous graphitic carbon fiber

Hierarchically porous cellulose-based carbon aerogels with N-doped skeletons and encapsulated iron-based catalysts for efficient tetracycline catalytic degradation

Graphene Oxide Structure-Oriented NM88B/GO/SA Aerogel for Highly Efficient Degradation of Dye and Antibiotic Wastewater

Design and optimization of a novel Y-Fe-GO magnetic adsorbent for simultaneous removal of tetracycline and arsenic and adsorption mechanisms

Recyclable Ferroferric Oxide@titanium Dioxide@molybdenum Disulfide with Enhanced Enzyme-Like Activity under Visible Light for Effectively Inhibiting the Growth of Drug-Resistant Bacteria in Sewage.

Direct-writing of three-dimensional porous Fe3N/FeS electrode for efficient degradation of organic pollutants in water through Electro-Fenton process