Abstract:The development and design of the anode materials has become one of research hotspots for high-performance Lithium ion batteries (LIBs) currently. Sn4P3 has a layer crystal structure, and its special crystal structure endow it superior electrochemical performance, such as high theory capacity, better electron conductivity etc, which is thought to be a promising anode material for LIBs. But the rapid capacity attenuation caused by the huge volume change and tin nanoparticles (NPs) agglomeration during the cycling process greatly limits its application. Herein, tin phosphide/ multi-walled carbon nanotubes (Sn4P3/MWCNTs) is synthesized successfully by a facile in-situ solvothermal method. As the anode for LIBs, the Sn4P3/MWCNTs composite shows a discharge capacity of 783 mAh g−1 after 100 cycles at the current density of 100 mA g−1. Even at a current density of 1 A g−1 for 500 cycles, the reversible specific capacity still could be remained at 403 mAh g−1. The cycling performance of Sn4P3/MWCNTs at 100 and 500 mAg−1 after 100 cycles, which are far superior to that of bare Sn4P3 and MWCNTs. These excellent electrochemical performances are originated from the synergistic effect between MWCNTs and Sn4P3. MWCNTs is help to enhance the conductivity and serve as a framework to disperse Sn4P3 NPs, further it can alleviate the large volume change to improve cycle stability during the charge/discharge process, while Sn4P3 NPs can contribute high specific capacity. In addition, the pseudocapacitance capacity contribution can explain the stable Li+ storage and good rate performance of Sn4P3/MWCNTs composite. Hence, Sn4P3/MWCNTs suggests a huge potential as anode materials for low cost and high- performance LIBs.

In-situ liquid-phase transformation of SnS2/CNTs composite from SnO2/CNTs for high performance lithium-ion battery anode

Two-Dimensional SnSe2/CNTs Hybrid Nanostructures As Anode Materials for High-Performance Lithium-Ion Batteries

One-Pot Synthesis of High-Performance Tin Chalcogenides/C Anodes for Li-Ion Batteries

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

In situ synthesis of CuxO/SnOx@CNT and CuxO/SnOx@SnO₂/CNT nanocomposite anodes for lithium ion batteries by a simple chemical treatment process.

In-situ vulcanization synthesis of honeycomb-like SnS/C nanocomposites as anode materials for lithium-ion batteries

Dual‐Carbon Confined SnP2O7 with Enhanced Pseudocapacitances for Improved Li/Na‐Ion Batteries

Intermetallic SnSb Nanodots Embedded in Carbon Nanotubes Reinforced Nanofabric Electrodes with High Reversibility and Rate Capability for Flexible Li-ion Batteries

SnS particles anchored on Ti<sub>3</sub>C<sub>2</sub> nanosheets as high-performance anodes for lithium-ion batteries

SnS particles anchored on Ti3C2 nanosheets as high-performance anodes for lithium-ion batteries

In situ chemically encapsulated and controlled SnS2 nanocrystal composites for durable lithium/sodium-ion batteries

SnS@C nanoparticles anchored on graphene oxide as high-performance anode materials for lithium-ion batteries

In-situ coupling SnS with nitrogen-doped porous carbon for boosting Li-storage in lithium-ion battery and capacitor

Atomically Dispersed Sn Incorporated into Carbon Matrix for Stable Electrochemical Lithium Storage

Superior lithium-ion storage performance of hierarchical tin disulfide and carbon nanotube-carbon cloth composites

Rational Synthesis of SnS 2 @C Hollow Microspheres with Superior Stability for Lithium-Ion Batteries

Constructing 2D SnS@C nanosheets anchored on interconnected carbon nanotube networks as advanced anode materials for lithium ion and sodium ion batteries

Interlayer expanded SnS/N-doped carbon/SnS ultra-thin composite driven from layered tin chalcogenides as advanced anode for lithium and sodium ion battery

Graphene‐Like Carbon Film Wrapped Tin (II) Sulfide Nanosheet Arrays on Porous Carbon Fibers with Enhanced Electrochemical Kinetics as High‐Performance Li and Na Ion Battery Anodes

Well-dispersed tin nanoparticles encapsulated in amorphous carbon tubes as high-performance anode for lithium ion batteries

Tin phosphide nanoparticles loaded on multi-walled carbon nanotubes networks as a superior anode material for lithium ion batteries