Abstract:Compared to the conventional lithium-sulfur (Li-S) batteries using liquid electrolytes, all-solid-state lithium-sulfur batteries (ASSLSBs) own the merits of eliminating polysulfide shuttle effects, potentially higher energy density, and superior safety. However, there are challenges of low utilization of sulfur caused by poor ion and electron conductions in the cathode, huge interfacial resistance due to the contact loss caused by huge volume change of sulfur during cycling, and sluggish reaction kinetics and higher thermodynamic barriers because of the one-step reaction from S 8 to Li 2 S reactions. Also, the carbon additive could accelerate the decomposition of sulfide solid-state electrolyte (SSE) resulting newborn impedance. Therefore, it is significant to interface engineering the carbon additive through surface modification and functionalization to improve the electrochemical stability, charge transfer, and reaction kinetics in ASSLSBs. Herein, for the first time, we designed a highly conductive carbon fiber decorated with vertically grown MoS 2 nanosheets and applied it in ASSLSBs. The chemical and electrochemical compatibility among MoS 2 , sulfur, and sulfide SSE can greatly improve the stability of the cathode and therefore maintain pristine interfaces between the different compositions for stable ion and electron transport. The presence of electrical-conductive metallic 1T MoS 2 and its uniform distribution on carbon fiber without aggregation benefit the electron transfer between carbon and sulfur. Meanwhile, the unique layered structure of MoS 2 can be intercalated by a large amount of Li atoms and therefore facilitate both ionic and electronic conductivity. In consequence, the charge transfer and reaction kinetics were greatly enhanced, and the decomposition of SSEs was successfully relieved. As a result, our ASSLSB delivered an ultrahigh initial discharge capacity of 1456 mAh g -1 with ultrahigh initial coulombic efficiency and maintained high-capacity retention of 78 % at 0.1 C after 220 cycles. The batteries also obtained remarkable rate performance of 1069 mAh g -1 at 1 C. This study pioneered new idea that fabricating the high performance ASSLSBs through developing surface functionalized and stabilized conductive carbon additives with metal sulfides.

Tuning the ionic and electronic paths in Li 2 S-based cathode for high-rate performance all-solid-state lithium‐sulfur batteries

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

Exploring the Concordant Solid-State Electrolytes for All-Solid-state Lithium-Sulfur Batteries

An Electron/Ion Dual Conductive Integrated Cathode Using Cationic/Anionic Redox for High‐Energy‐Density All‐Solid‐State Lithium‐Sulfur Batteries

Li 2 S-Based Composite Cathode with in Situ-Generated Li 3 PS 4 Electrolyte on Li 2 S for Advanced All-Solid-State Lithium-Sulfur Batteries

High-Performance All-Solid-State Lithium-Sulfur Battery Enabled by A Mixed-Conductive Li2s Nanocomposite

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

High-performance all-solid-state lithium-sulfur batteries with sulfur/carbon nano-hybrids in composite cathode

Transition-Metal Sulfides for High-Performance Lithium Sulfide Cathodes in All-Solid-State Lithium-Sulfur Batteries

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

Sulfur/carbon cathode composite with LiI additives for enhanced electrochemical performance in all-solid-state lithium-sulfur batteries

Constructing the Interconnected Charge Transfer Pathways in Sulfur Composite Cathode for All-Solid-State Lithium-Sulfur Batteries

Conductive Li2S-NbSe2 Cathode Material Capable of Bidirectional Self-Activation for High-Performance All-Solid-State Lithium Metal Batteries

High-Performance All-Solid-State Li-S Batteries Enabled by Reaction Kinetics Enhancement and Interface Stabilization

High-Performance All-Inorganic Solid-State Sodium-Sulfur Battery.

Li2S@NC composite enable high active material loading and high Li2S utilization for all-solid-state lithium sulfur batteries

Approaching high rate All-Solid-State Lithium-Sulfur batteries via promoted sulfur conversion with nickel oxide nanoparticle electrocatalyst

Improved Interfacial Electronic Contacts Powering High Sulfur Utilization in All-Solid-state Lithium–sulfur Batteries

Nano‐Scale Interface Engineering of Sulfur Cathode to Enable High‐Performance All‐Solid‐State Li–S Batteries

Progress and Prospects of Inorganic Solid‐State Electrolyte‐Based All‐Solid‐State Li–S Batteries

Dry electrode technology for scalable and flexible high-energy sulfur cathodes in all-solid-state lithium-sulfur batteries