Abstract:All-solid-state lithium batteries (ASSB) have emerged as key components in energy storage applications owing to their superior safety characteristics and high energy density. The use of sulfide solid electrolytes has considerably promoted the development of all-solid-state lithium batteries because of advantages such as a high ionic conductivity, formability, and good interface compatibility with electrodes. In this review, we first discuss the issues hindering the use of sulfide-based all-solid-state lithium batteries, focusing on aspects related to the cathode/electrolyte interface, sulfide solid electrolytes, and the anode/electrolyte interface. At the cathode/electrolyte interface, interfacial side reactions inherently occur due to the narrow electrochemical window of sulfide electrolytes when used with high-voltage cathode materials, which degrades the battery performance. In addition, owing to the chemical potential difference between cathode materials and sulfide solid electrolytes, the space-charge layer generated due to the formation of a lithium depletion layer is also detrimental to the cell performance. To overcome these difficulties, inert coatings, replacing sulfide solid electrolytes with halide solid electrolytes, and replacing frequently used transitional metal oxide cathode materials with other materials that are better suited for sulfide solid electrolytes to modify the composite cathode have been explored. Improvements in the ionic conductivity and air stability are imperative for sulfide solid electrolytes. Strategies to optimize the solid electrolyte have mainly focused on doping or adjusting the synthesis routes of the sulfide solid electrolyte, which have resulted in notable improvements. At the anode/electrolyte interface, lithium dendrite formation and interfacial reactions between lithium metal and the sulfide solid electrolyte are the most notable challenges. Using artificial solid electrolyte interfaces with a low electronic conductivity, employing an alloy anode, and synthesizing composite electrolytes are typical approaches for overcoming these problems. In addition, from the perspective of the practical production of sulfide-based all-solid-state lithium batteries, electrode/electrolyte membrane-forming technology and the assembly of pouch cells are introduced. Membrane-forming technology has gained extensive attention with the aim of fabricating thin and mechanically stronger solid electrolyte membranes. High-loading cathode membranes as well as solid electrolyte membranes, dry processing, and wet processing are reviewed. Moreover, the improvement in the solid-solid contact of pouch cells, the design of high-loading cathodes, and the low-cost and scaled up production of sulfide solid electrolytes are introduced. Finally, we also propose research directions and future development trends for sulfide-based all-solid-state lithium batteries.

Interface problems, modification strategies and prospects of Ni–rich layered oxide cathode materials in all–solid–state lithium batteries with sulfide electrolytes

Ni-Rich Layered Oxide Cathodes/Sulfide Electrolyte Interface in Solid-State Lithium Battery

Interface issues between cathode and electrolyte in sulfide-based all-solid-state lithium batteries and improvement strategies of interface performance through cathode modification

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

All-Solid-State Lithium Batteries with Sulfide Electrolytes and Oxide Cathodes

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Dual-functional interfaces for highly stable Ni-rich layered cathodes in sulfide all-solid-state batteries

Slurry-Coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 -Li 3 InCl 6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries

Progress and Prospects of Inorganic Solid‐State Electrolyte‐Based All‐Solid‐State Li–S Batteries

Challenges and optimization strategies at the interface between sulfide solid electrolyte and lithium anode

Designing High-Performance Sulfide-Based All-Solid-State Lithium Batteries: from Laboratory to Practical Application

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

Recent Advancements in Interface Between Cathode and Garnet Solid Electrolyte for All Solid State Li-ion Batteries

Exploring the Cathode Active Materials for Sulfide-Based All-Solid-State Lithium Batteries with High Energy Density

Interfacial Challenges, processing strategies, and composite applications for high voltage all-solid-state lithium batteries based on halide and sulfide solid-state electrolytes

Toward High Performance All‐Solid‐State Lithium Batteries with High‐Voltage Cathode Materials: Design Strategies for Solid Electrolytes, Cathode Interfaces, and Composite Electrodes

Electrochemical Compatibility of Solid-State Electrolytes with Cathodes and Anodes for All-Solid-State Lithium Batteries: A Review

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Insights into interfacial chemistry of Ni-rich cathodes and sulphide-based electrolytes in all-solid-state lithium batteries

From Liquid to Solid‐State Batteries: Li‐Rich Mn‐Based Layered Oxides As Emerging Cathodes with High Energy Density