Abstract:The development of all-solid-state lithium batteries with high energy density, long cycle life, low cost and high safety is one of the important directions for the developing next-generation lithium-ion batteries. Lithium -rich cathode materials have been widely used in liquid lithium batteries for their higher discharge specific capacity (> 250 mAh/g) and energy density (> 900 Wh/kg), high thermal stability and low raw material cost. With the rapid development of high-performance lithium-rich cathode materials and solid-state electrolytes in all-solid-state lithium batteries, the application of lithium-rich cathode materials in all-solid-state lithium batteries is expected to make a breakthrough toward the target of 500 Wh/kg energy density of lithium-ion batteries. In this review, first, we elaborate the failure mechanism of lithium-rich cathode materials in all -solid-state lithium batteries. The poor electronic conductivity, irreversible redox reaction of anionic oxygen and structute transformation during the electrochemical cycling of lithium-rich cathode materials result in the low initial coulomb efficiency, poor cycling stability and voltage decay. In addition, the high operating voltage of lithium-rich cathode materials (> 4.5 V vs. Li/Li+) triggers off not only the conventional interfacial chemical reactions between anode and electrolyte, but also the release of oxygen, aggravating the interfacial electrochemical reactions, which reduces the stability of the cathode/electrolyte interface. Therefore, the intrinsic characteristics of lithium-rich cathode materials and the severe interfacial reaction of lithium-rich cathode/electrolyte greatly limit the application of lithium-rich cathode materials in all-solid-state lithium batteries. Then, we review the research progress of lithium-rich cathode materials in various solid-state electrolyte systems in recent years. The higher room temperature ionic conductivity and wider voltage window of inorganic solid-state electrolytes provide opportunities for the application of lithium-rich cathode materials in all-solid-state lithium batteries. At present, the application of lithium-rich cathode materials in all-solid-state lithium batteries is explored on the basis of sulfide, halide and oxide solid-state electrolyte systems, and important progress has been made in the studies of composite cathode preparation methods, interfacial reaction mechanisms and activation mechanisms. Finally, we summarize the current research hotspot of lithium-rich cathode all-solid-state lithium batteries and propose several strategies for their future studies, such as the regulation of cathode material components, the construction of lithium ion and electron transport pathways within the composite cathode, and the interfacial modification of cathode materials that have been shown to have significant effects in solving the failure problem.

From Liquid to Solid‐State Batteries: Li‐Rich Mn‐Based Layered Oxides As Emerging Cathodes with High Energy Density

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

Surface Modification of Li‐Rich Mn‐Based Layered Oxide Cathodes: Challenges, Materials, Methods, and Characterization

Recent Advance in Mn-based Li-rich Cathode Materials: Oxygen Release Mechanism and Its Solution Strategies Based on Electronic Structure Perspective, Spanning from Commercial Liquid Batteries to All-Solid-state Batteries

Eliminating interfacial O-involving degradation in Li-rich Mn-based cathodes for all-solid-state lithium batteries.

Building Better Batteries: Solid-State Batteries with Li-Rich Oxide Cathodes

Current Status and Future Directions of All-Solid-state Batteries with Lithium Metal Anodes, Sulfide Electrolytes, and Layered Transition Metal Oxide Cathodes

Mechano‐Electrochemical Behavior of Nanostructured Li‐ and Mn‐Rich Layered Oxides with Superior Capacity Retention and Voltage Decay for Sulfide‐Based All‐Solid‐State Batteries

High Energy Sulfide-Based All-Solid-State Lithium Batteries Enabled by Single-Crystal Li-Rich Cathodes

Multi-strategies interface and structure design of Li- and Mn-rich layered oxide for all-solid-state lithium batteries

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

Bulk/Interfacial Structure Design of Li-Rich Mn-Based Cathodes for All-Solid-State Lithium Batteries

Recent progress in Li and Mn rich layered oxide cathodes for Li-ion batteries

High-Energy and Long-Cycling All-Solid-State Lithium-Ion Batteries with Li- and Mn-Rich Layered Oxide Cathodes and Sulfide Electrolytes

Li- and Mn-rich layered oxide cathode materials for lithium-ion batteries: a review from fundamentals to research progress and applications

Ni-Rich Layered Oxide Cathodes/Sulfide Electrolyte Interface in Solid-State Lithium Battery

Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries

Manipulating Charge‐Transfer Kinetics of Lithium‐Rich Layered Oxide Cathodes in Halide All‐Solid‐State Batteries

Research Advance of Lithium-Rich Cathode Materials in All-Solid-state Lithium Batteries