Abstract:For the purpose of elevated temperature service and weight reduction in aerospace vehicle applications, a novel Ti–Zr–Fe–Cu–Ni–Co–Mo filler metal was employed to join TiAl to Ni-based superalloy (GH536). The effects of brazing temperature on interfacial microstructure and chemical composition of the joints were analyzed. The representative joint microstructure from TiAl substrate to GH536 substrate was primarily composed of four characteristic layers in order: B2; Al3NiTi2; AlNi2Ti containing Cr-rich (Cr, Ni, Fe)ss (subscript ss represents solid solution), Ni-rich (Ni, Cr, Fe)ss and TiNi3; Cr-rich (Cr, Ni, Fe)ss containing AlNi2Ti, Ni-rich (Ni, Cr, Fe)ss and TiNi3. Layer IV has the majority of the brazing seam, while Layer II was the thinnest. And the thickness of Layer II was not affected by brazing temperature. With the increase in brazing temperature in the range of 1110–1170 °C, both the shear strength and the thickness of brazing seam firstly increased and then decreased. The joint performance was jointly controlled by the thickness of brazing seam, the amounts of microcracks and intermetallic compounds formed in brazing seam. The maximum shear strength of 183 MPa at room temperature was obtained together with a peak thickness when the joint was brazed at 1150 °C for 10 min and the shear fracture mainly occurred in the thinnest Layer II Al3NiTi2.<h3 class="a-plus-plus">Graphic abstract</h3>

Novel Ti–Zr–Co–Cu–M (M = Sn, V, Al) amorphous/nanocrystalline brazing fillers for joining Ti–6Al–4 V alloy

Brazing of TC4 Alloy Using Ti-Zr-Ni-Cu-Sn Amorphous Braze Fillers

Microstructure and mechanical properties of TC4 joints brazed with Ti–Zr–Cu–Sn amorphous filler alloy

Optimization of the Microstructure and Mechanical Properties of a TC4 Alloy Joint Brazed with a Zr-Based Filler Containing a Co Element

A high-strength vacuum brazed TC4/316L joint with a Ti–Zr-based amorphous ribbon as the filler metal

Ultrasonic-assisted Brazing of SiC Ceramic to Ti–6Al–4V Alloy Using a Novel AlSnSiZnMg Filler Metal

Brazing TC4 titanium alloy/316L stainless steel joint with Ti50-xZrxCu39Ni11 amorphous filler metals

Brazing of Ti2AlNb based alloy with amorphous Ti-Cu-Zr-Ni filler

Brazing Ti-48Al-2Nb-2Cr Alloys with Cu-Based Amorphous Alloy Filler

Enhanced Vacuum Brazing Joining Between Ti–48Al–2Cr–2Nb/Ti–22Al–25Nb Intermetallic Alloys by Zr-free Ti-based Filler

Microstructure and Mechanical Properties of ZrB2‐SiC/Nb Joints Brazed with CoFeNiCrCuTix High‐entropy Alloy Filler

Brazing ZrB2-SiC Ceramics to Ti6Al4V Alloy with TiCu-based Amorphous Filler

Microstructure and Strength of Brazed Joints of Ti3al-Base Alloy with Different Filler Metals

Microstructure and Properties of Al_2O_3/CuSnTi＋B/Ti-6Al-4V Alloy Joint

Microstructure Evolution and Mechanical Property of ZrC-SiC/Ti6Al4V Joints Brazed Using Ti-15Cu-15Ni Filler

Microstructure and mechanical properties of ZrB 2 ‐SiC/Nb joints brazed with CoFeNiCrCuTi x high‐entropy alloy filler

Influence of Zr addition on TIG welding-brazing of Ti-6Al-4V toAl5A06

Microstructure and mechanical properties of TiAl/Ni-based superalloy joints vacuum brazed with Ti–Zr–Fe–Cu–Ni–Co–Mo filler metal

Brazing Zircaloy-4 to Ti3AlC2 Using Ti-Zr-Cu-Ni Amorphous Alloys: Microstructural Evolution and Mechanical Properties

Effect of brazing filler alloy composition on microstructure and mechanical properties of Nb–Ti–Co/Nb–Ti joints

Effect of Brazing Temperature on Microstructure and Mechanical Properties of TiAl/ZrB2 Joint Brazed with CuTiZrNi Filler