Abstract:Fused deposition modelling (FDM) is a popular additive manufacturing process used for rapid prototyping and the production of complex geometries. Despite its popularity, FDM's susceptibility to variations in numerous process parameters can significantly impact the quality, design, functionality, and mechanical properties of 3D printed parts. This study explores thirteen FDM process parameters and their influence on the mechanical properties of polylactic acid (PLA) polymer, encompassing surface roughness, warpage, tensile and bending strength, elongation at break, deformation, and microhardness. The optimum parameters were identified alongside key contributors by applying the Taguchi method, signal-to-noise ratios, and analysis of variances (ANOVA). Notably, specific FDM parameters significantly affect the surface profile, with layer thickness contributing 32.65% and fan speed contributing 8.59% to the observed variations. Similarly, warping values show notable influence from nozzle temperature (29.53%), wall thickness (16.74%), layer thickness (16.56%), and retraction distance (12.80%). Tensile strength is primarily determined by wall thickness (31.83%), followed by infill percentage (26.73%) and infill pattern (16.18%). Elongation at break predominantly correlates with wall thickness (44.82%), with a supplementary contribution from nozzle temperature (10.90%). Microhardness lacks a dominant parameter. Bending strength variations primarily arise from layer thickness (38%), wall thickness (37.6%), and infill percentage (9.17%). Deformation tendencies are influenced by layer thickness (19.20%), print speed (11.37%), wall thickness, and fan speed (10.9% each). The optimized dataset of FDM process parameters was then employed in two prediction models: multiple-regression and artificial neural network (ANN). Evaluation based on the correlation coefficient (R2) and root mean squared error (RMSE) indicates that the ANN model outperforms the multiple-regression approach. The results indicate that precise control of FDM parameters, coupled with ANN predictions, facilitates the fabrication of 3D-printed parts with the desired mechanical characteristics.

A Quality Prediction Method for Dual-Nozzle FDM Molded Parts Based on CIWOA–BP

A Novel Modeling Approach and Its Application in Polymer Quality Index Prediction

Product Quality Prediction Method for Injection Molding Process Based on Operating Mode Recognition

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Modeling and optimization of fused deposition modeling (FDM) process through printing PLA implants using adaptive neuro-fuzzy inference system (ANFIS) model and whale optimization algorithm

Early quality prediction of complex double-walled hollow turbine blades based on improved whale optimization algorithm

Quality prediction and control of thin-walled shell injection molding based on GWO-PSO, ACO-BP, and NSGA-II

Multi-quality prediction of injection molding parts using a hybrid machine learning model

Optimization and prediction of volume shrinkage and warpage of injection-molded thin-walled parts based on neural network

Quality Prediction for Wire Arc Additive Manufacturing Based on Multi-source Signals, Whale Optimization Algorithm–Variational Modal Decomposition, and One-Dimensional Convolutional Neural Network

Quality Prediction for Injection Molding by Using a Multilayer Perceptron Neural Network

Quality Prediction of Injection Molding Process Using CNN and Parallel-Cascade LSTMs

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

A novel DL-BiGRU multi-feature fusion and deep transfer learning based modeling approach for quality prediction of injection molded products using small-sample datasets

Modelling and prediction of mechanical properties of FFF-printed polycarbonate parts using ML and DA hybrid approach

Development of artificial intelligence‐based neural network prediction model for responses of additive manufactured polylactic acid parts

Optimization of surface roughness and dimensional accuracy in LPBF additive manufacturing

A theoretical approach based on machine learning for estimation of physical properties of LLDPE in moulding process

A method combining optimization algorithm and inverse-deformation design for improving the injection quality of box-shaped parts

Prediction of the Injection Quality Based on CAE and BP Neural Network

Qualify assessment for extrusion-based additive manufacturing with 3D scan and machine learning