Abstract:The incorporation of rare-earth elements in wurtzite nitride semiconductors, e.g., scandium alloyed aluminum nitride (ScAlN), promises dramatically enhanced piezoelectric responses, critical to a broad range of acoustic, electronic, photonic, and quantum devices and applications. Experimentally, however, the measured piezoelectric responses of nitride semiconductors are far below what theory has predicted. Here, we show that the use of a simple, scalable, post-growth thermal annealing process can dramatically boost the piezoelectric response of ScAlN thin films. We achieve a remarkable 3.5-fold increase in the piezoelectric modulus, d33 for 30% Sc content ScAlN, from 12.3 pC/N in the as-grown state to 45.5 pC/N, which is eight times larger than that of AlN. The enhancement in piezoelectricity has been unambiguously confirmed by three separate measurement techniques. Such a dramatic enhancement of d33 has been shown to impact the effective electromechanical coupling coefficient kt2 : increasing it from 13.8% to 76.2%, which matches the highest reported values in millimeter thick lithium niobate films but is achieved in a 100 nm ScAlN with a 10,000 fold reduction in thickness, thus promising extreme frequency scaling opportunities for bulk acoustic wave resonators for beyond 5G applications. By utilizing a range of material characterization techniques, we have elucidated the underlying mechanisms for the dramatically enhanced piezoelectric responses, including improved structural quality at the macroscopic scale, more homogeneous and ordered distribution of domain structures at the mesoscopic scale, and the reduction of lattice parameter ratio (c/a) for the wurtzite crystal structure at the atomic scale. Overall, the findings present a simple yet highly effective pathway that can be extended to other material families to further enhance their piezo responses.

Origin of Enhanced Electromechanical Coupling in (Yb,Al)N Nitride Alloys

Enhanced Electromechanical Coupling in Yb-Substituted III–V Nitride Alloys

Tuning the piezoelectric and mechanical properties of the AlN system via alloying with YN and BN

Alloying aluminum nitride with molybdenum could significantly enhance its electromechanical coupling constant

Investigation of Elastic Softening and Stiffening Effect of Aluminum Nitride under Stress Loading by Born-Lande Equation

Electronic Structure and Optical Properties of YAlN: A First‐Principles Study

Enhanced piezoelectric response of AlN via alloying of transitional metals, and influence of type and distribution of transition metals

First-principles study of elastic properties of Cr-Al-N

Enhanced Thermoelectric and Mechanical Performance in N-Type Yb-filled Skutterudites Through Aluminum Alloying.

Large Piezoelectric and Elastic Properties in B and Sc Codoped Wurtzite AlN

The exceptionally high thermal conductivity after ‘alloying’ two-dimensional gallium nitride (GaN) and aluminum nitride (AlN)

Significantly Enhanced Mechanical Properties in AlN Helix.

Thermodynamic Analysis of Group-III-Nitride Alloying with Yttrium by Hybrid Chemical Vapor Deposition

Experimental Observation of High Intrinsic Thermal Conductivity of AlN

Ferroelectricity in boron-substituted aluminum nitride thin films

Size-Induced Reduction of Transition Pressure and Enhancement of Bulk Modulus of AlN Nanocrystals

Effect of yttrium on phase composition and microstructure of FeCoNiAlCrB high entropy alloys

Ab initio study of the alloying effect of transition metals on structure, stability and ductility of CrN

Local Lattice Distortions, Phase Stability, and Mechanical Properties of NbMoTaWHfx Alloys: A Combined Theoretical and Experimental Study

Local lattice distortions, phase stability, and mechanical properties of NbMoTaWHf x alloys: A combined theoretical and experimental study

Unprecedented Enhancement of Piezoelectricity in Wurtzite Nitride Semiconductors via Thermal Annealing