Abstract:With the rapid development of portable and wearable electronics, safety concerns over flexible energy devices are inevitable. Therefore, it is important to develop energy supplies that are safe for use. In this work, a highly safe, durable, adaptable, and flexible air‐breathing direct methanol fuel cell (DMFC) is successfully prepared by synthesizing and applying a new composite material with agar gel and wood sponge, that is, a gel/sponge composite. The gel/sponge composite has a high absorption rate, high cyclic performance, high methanol absorption capacity, high energy content, and high flexibility. Moreover, the gel/sponge composite with 1.5% agar gel retains approximately 90% of the methanol solution at a pressure of 29.4 kPa, and the areal energy density of the proposed DMFC approaches 13.7 mWh cm−2. Both the single‐cell and stack of DMFC with the new composite material successfully survive a series of destructive tests, including needle penetration, cutting, and compression. Therefore, it is successfully demonstrated that absorbent materials can greatly boost the safety, adaptability, flexibility, and energy density of air‐breathing DMFCs. Furthermore, this concept shows promise in improving the safety of other fuel cells by using absorbent materials to solidify their gaseous or liquid fuels. With the rapid development of portable and wearable electronics, safety concerns over flexible energy devices are inevitable. In this work, a highly safe, durable, adaptable, and flexible air‐breathing direct methanol fuel cell is successfully prepared by synthesizing and applying a new composite material with agar gel and wood sponge, that is, a gel/sponge composite.

Highly Safe, Durable, Adaptable, and Flexible Fuel Cell Using Gel/Sponge Composite Material (Adv. Energy Mater. 6/2022)

Highly Safe, Durable, Adaptable, and Flexible Fuel Cell Using Gel/Sponge Composite Material

A highly stable Cu(OH)<sub>2</sub>-Poly(vinyl alcohol) nanocomposite membrane for dramatically enhanced direct borohydride fuel cell performance

Advanced Nanocellulose‐Based Composites for Flexible Functional Energy Storage Devices (Adv. Mater. 48/2021)

Development of Novel Single Fuel Cell Based on Composite Polar Plates for Highly Efficient Power Generation

A Hybrid Biofuel Cell with High Power and Operational Stability Using Electron Transfer‐Intensified Mediators and Multi‐Interaction Assembly (Adv. Energy Mater. 32/2024)

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

A Recyclable Standalone Microporous Layer with Interpenetrating Network for Sustainable Fuel Cells

Flexible Solid‐State Direct Ethanol Fuel Cell Catalyzed by Nanoporous High‐Entropy Al‐Pd‐Ni‐Cu‐Mo Anode and Spinel (AlMnCo) 3 O 4 Cathode

A High-Performance Direct Methanol Fuel Cell Technology Enabled by Mediating High-Concentration Methanol Through a Graphene Aerogel

Design and Test of a Carbon-Tolerant Alkaline Fuel Cell

Flexible proton-conducting glass-based composite membranes for fuel cell application

Preparation of novel nano-SiO2-gel additive and performance of PEM fuel cell

Recent Developments in Carbon-Based Nanocomposites for Fuel Cell Applications: A Review

Fabrication and Characterization of a Composite Ni-SDC Fuel Cell Cathode Reinforced by Ni Foam

Flexible direct formate paper fuel cells with high performance and great durability

Developing Next Generation High Performance Polymer Electrolyte Membrane Fuel Cells Using Metal Foam As Gas Diffusion Layer

Materials for fuel-cell technologies

Sulfonated poly(fluorene ether ketone) (SPFEK)/α-zirconium phosphate (ZrP) nanocomposite membranes for fuel cell applications

Lithium‐Ion Batteries: Highly‐Safe and Ultra‐Stable All‐Flexible Gel Polymer Lithium Ion Batteries Aiming for Scalable Applications (adv. Energy Mater. 21/2020)

The advances development of proton exchange membrane with high proton conductivity and balanced stability in fuel cells