Abstract:Due to either elastic deformations or errors in the manufacturing or assembling of gears, shafts, bearings and their housings, it is an inevitable consequence that mesh misalignment between teeth occurs. The change in length of the contact line or the change in load distribution along the length of the contact line induced by mesh misalignment causes changes in the dynamic characteristics of helical gears. There is currently no satisfactory solution for the modeling and calculation of the internal excitation in helical gears with mesh misalignment and sliding friction that would reveal the changes in the dynamic characteristics. In this study, an improved calculation method of friction excitation is proposed based on the time-varying length of the contact line and the time-varying friction coefficient model in helical gears. By considering the change in the mesh position and the change in the length of the contact line or the change of the displacement error along the contact line induced by mesh misalignment, the time-varying sliding friction force and the dynamic mesh force may be obtained. An eight degree-of-freedom analytical helical gear pair model is developed by incorporating the time-varying sliding friction force and dynamic mesh force and considering the mesh misalignment. By assuming a constant mesh stiffness density along the contact line, the rules governing the variation of the dynamic response are obtained using simulations of helical gear pair examples with different friction coefficient models and mesh misalignment. The developed analytical model provides a new method for the study of excitation characteristics in helical gears with mesh misalignment.

A novel method to reduce the fluctuation of mesh stiffness by high-order phasing gear sets: Theoretical analysis and experiment

Research on gear mesh stiffness of helical gear based on combining contact line analysis method

Dynamic Analysis of a Multi-Mesh Gear System with Mesh Stiffness Variation

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Research on the model of staggered tooth phase to reduce vibration of single-stage gear transmission system: Theoretical analysis and experiments

Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears

Analytical investigation of profile shifts on the mesh stiffness and dynamic characteristics of spur gears

A novel analytical method for mesh stiffness calculation of helical gears with tooth profile modification

Dynamic modeling and vibration analysis of planetary gear sets concerning mesh phasing modulation

Research on the Influence of Backlash on Mesh Stiffness and the Nonlinear Dynamics of Spur Gears

Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness

Theoretical Analysis of the Natural Frequency of A Geared System under the Influence of A Variable Mesh Stiffness

Analytical investigation on unstable vibrations of single-mesh gear systems with velocity-modulated time-varying stiffness

An improved time-varying mesh stiffness calculation method and dynamic characteristic analysis for helical gears under variable torque conditions

Study of the time-varying mesh stiffness of two-stage planetary gear train considering tooth surface wear

Spur gear time-varying mesh stiffness considering meshing phase difference caused by angle misalignment error

Effects of gear eccentricity on time-varying mesh stiffness and dynamic behavior of a two-stage gear system

The Influence of Mesh Misalignment on the Dynamic Characteristics of Helical Gears Including Sliding Friction

Dynamic analysis of gear pairs considering the actual contact state of truncated asperities on the 3D rough surfaces and force-dependent mesh stiffness

Analysis of Vibration Characteristics of Face Gear powering-split Transmission System

Modelling of time-varying meshing stiffness under tooth wear condition for nonlinear dynamics in compound planetary gear set