Abstract:In this paper, a bi-directional-buck-boost-converter-based active equalizer is developed. The energy between adjacent cells can be transferred bi-directionally by manipulating the balancing current to solve the unbalanced problem in a battery module. It is noted that the conduction time of the main switch in the conventional buck-boost equalizer is fixed. Thus, the balancing current will diminish as the voltage difference of the adjacent cells decreases, which results in a prolonged equilibrium period. This paper has proposed two methods, namely, the varied-on-time (VOT) method and the voltage ratio modulation (VRM) method, to shorten the equilibrium period. In the VOT method, the conduction time of the main switch is determined according to high state-of-charge (SOC) cell voltage. In this way, the balancing current is able to be kept at the desired level rather than reduced during the balancing process. On the other hand, the VRM method computes the proportion of the conduction time and the cut-off time in a switching cycle based on the voltages of adjacent cells. Hence, the equalizer can deliver the maximum energy in a switching period and shorten the equilibrium period. The simulation platform and experiments with four batteries connected in serial are carried out to verify the proposed control methods. According to the experimental results, the VOT method saves 10.3%, 11.7%, and 16% of the equilibrium time compared with the fixed duty cycle (FDC) method. The VRM method can shorten 35.9%, 36.6%, and 37.3% of the equilibrium time compared with the FDC method.

Design of a bus-based battery equalization with zero-current switching

An Equalization Current Ripple Cancellation (ECRC) Converter-Based Centralized Equalization System for Series-Connected Battery Strings

Bidirectional Constant Current String-to-Cell Battery Equalizer Based on L2C3 Resonant Topology

Design and realization of active equalizer for lithium battery string

Design Of Equalization Circuit For Series-Connected Batteries

A Low Cost Battery Equalizing Scheme with Buck-Boost and Series Lc Converter Using Synchronous Phase-Shift Controller

A crossed pack-to-cell equalizer based on quasi-resonant LC converter with adaptive fuzzy logic equalization control for series-connected lithium-ion battery strings

A MultiWinding Transformer Cell-to-Cell Active Equalization Method for Lithium-Ion Batteries with Reduced Number of Driving Circuits

A Novel Lithium-ion Battery Active Equalization Structure and Its Control Strategy Based on Bidirectional Converter Unit

Novel voltage equalisation circuit of the lithium battery pack based on bidirectional flyback converter

Optimizing Control for System-Wide State-of-Charge Balancing in Cascaded H-Bridge Battery Energy Storage Systems

Development of an Active Equalizer for Lithium-Ion Batteries

A Reduced-Component-Count Centralized Equalization System for Series-Connected Battery Packs Based on a Novel Integrated Cascade Topology

Cell Balancing Control For Serially Connected Lithium-Ion Batteries

A novel double-layer active equalization scheme for lithium-ion batteries combining wireless power transfer

Bidirectional Active Equalization Control of Lithium Battery Pack Based on Energy Transfer

A Novel Centralized Equalization Topology for Series-Connected Battery Packs with Integrated Cascade Structure

Equalization Design of Series Connected Li-ion Battery Pack Based on Microcontroller

A Unified Control Strategy for Inductor-Based Active Battery Equalisation Schemes

Active Vehicle Battery Equalization Scheme in the Condition of Constant-Voltage/Current Charging and Discharging

A multi-winding transformer-based active cell equalizer with self-driven switches for series-connected lithium-ion batteries and super-capacitors