Abstract:Advanced lithium-ion batteries with high energy density, highrate capability, and excellent cycling performance are critically important for automotive and stationary energy storage applications such as electric vehicles, portable electronics, power tools, and energy storage for many types of renewable energy sources.[1–3] From the materials point of view, silicon is one of the most promising candidates as an anode material for these lithium-ion batteries owing to its abundance in nature, relatively low working potential, and highest known theoretical charge capacity of 4200 mAh g−1, 11 times higher than that of commercialized graphite.[4,5] One major challenge is that the dramatic volume change (>300%) for Si during lithium insertion and extraction processes causes capacity fading due to severe pulverization and electrical disconnection from the current collector, thus hindering practical applications.[5–8] In order to overcome these drawbacks, it is highly desirable to explore nanostructured silicon anodes with more robust architectures.[9–13] So far, silicon nanostructures (and their composites) with a variety of different dimensionalities, including nanoparticles,[14–18] nanospheres,[19] nanowires,[8,20–29] nanotubes,[30–32] nanoscale thin films,[7,33–35] and three-dimensional porous particles[36] have been reported to provide improved electrochemical performance over bulk silicon materials. These results are encouraging for the development of Si nanomaterials as potential building blocks for high-performance anode materials in lithium-ion batteries. Yet, scale-up and industrial implementation of these silicon nanostructures still lag behind and further improvements in overall performance, scalability, and cost are critically required. For example, silicon thin films exhibit highly improved cycling performance,[33,34] thanks to the anisotropy of their volume change. However, the optimized film thickness is usually a few hundred nanometers, which results in an areal capacity of ≈0.1 mAh cm−2, which is insufficient for application. Anodes made from one-dimensional silicon-based nanostructures can provide open space while remaining electrically connected to current collectors, allowing designs[8,12,13,30] which accommodate the volume change of silicon during lithium insertion. These nanostructures offer good contact with the current collectors at medium charge/discharge rate without

Diameter Dependent Performance of Silicon Nanowire Anodes Grown on 3D Current Collectors for Lithium-ion Batteries

Direct Growth of Ni2Si Nanowire Array Electrodes for High-performance Reversible Lithium-ion Batteries

Vertically ordered Ni 3Si 2/Si nanorod arrays as anode materials for high-performance Li-ion batteries

Large-scale Synthesis of Silicon Arrays of Nanowire on Titanium Substrate As High-Performance Anode of Li-ion Batteries

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Carbon Nanotube-Enhanced Growth of Silicon Nanowires As an Anode for High-Performance Lithium-Ion Batteries

Tissue-like Silicon Nanowires-Based Three-Dimensional Anodes for High-Capacity Lithium Ion Batteries

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Three-dimensional Network Current Collectors Supported Si Nanowires for Lithium-Ion Battery Applications

Crystalline-amorphous Core-Shell Silicon Nanowires for High Capacity and High Current Battery Electrodes.

Porous Si Nanowires from Cheap Metallurgical Silicon Stabilized by a Surface Oxide Layer for Lithium Ion Batteries

Three-dimensional nickel-silicide foam loaded with dense silicon nanowires as a robust anode for lithium-ion batteries

Novel silicon/copper nanowires as high-performance anodes for lithium ion batteries

A theoretical study of surface lithium effects on the [111] SiC nanowires as anode materials

Novel Size and Surface Oxide Effects in Silicon Nanowires As Lithium Battery Anodes

Ultrathin Silicon Nanowires Produced by a Bi-Metal-Assisted Chemical Etching Method for Highly Stable Lithium-Ion Battery Anodes

Three-Dimensional Porous Si with in Situ Decorated Carbon Nanotubes As Anode Materials for Li-Ion Batteries

Silicon nanowires for Li-based battery anodes: a review

The high cycling performance of ultra-thin Si nanowires fabricated by metal-assisted chemical etching method as lithium-ion batteries anode

Si Nanoparticle-Decorated Si Nanowire Networks for Li-ion Battery Anodes.