Abstract:Silicon is an attractive anode material for lithium-ion batteries. However, silicon anodes have the issue of volume change, which causes pulverization and subsequently rapid capacity fade. Herein, we report organic binder and conducting diluent-free silicon-carbon 3D electrodes as anodes for lithium-ion batteries, where we replace the conventional copper (Cu) foil current collector with highly conductive carbon fibers (CFs) of 5-10 μm in diameter. We demonstrate here the petroleum pitch (P-pitch) which adequately coat between the CFs and Si-nanoparticles (NPs) between 700 and 1000 °C under argon atmosphere and forms uniform continuous layer of 6-14 nm thick coating along the exterior surfaces of Si-NPs and 3D CFs. The electrodes fabricate at 1000 °C deliver capacities in excess of 2000 mA h g-1 at C/10 and about 1000 mA h g-1 at 5 C rate for 250 cycles in half-cell configuration. Synergistic effect of carbon coating and 3D CF electrode architecture at 1000 °C improve the efficiency of the Si-C composite during long cycling. Full cells using Si-carbon composite electrode and Li1.2Ni0.15Mn0.55Co0.1O2-based cathode show high open-circuit voltage of >4 V and energy density of >500 W h kg-1. Replacement of organic binder and copper current collector by high-temperature binder P-pitch and CFs further enhances energy density per unit area of the electrode. It is believed that the study will open a new realm of possibility for the development of Li-ion cell having almost double the energy density of currently available Li-ion batteries that is suitable for electric vehicles.

Three-dimensional Network Current Collectors Supported Si Nanowires for Lithium-Ion Battery Applications

Three-dimensional nickel-silicide foam loaded with dense silicon nanowires as a robust anode for lithium-ion batteries

Synthesis of nanoporous three-dimensional current collector for high-performance lithium-ion batteries

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Vertically ordered Ni 3Si 2/Si nanorod arrays as anode materials for high-performance Li-ion batteries

Rational design of highly conductive and stable 3D flexible composite current collector for high performance lithium-ion battery electrodes

Three-dimensional Carbon-Coated Si/rGO Nanostructures Anchored by Nickel Foam with Carbon Nanotubes for Li-ion Battery Applications

Si Nanoparticle-Decorated Si Nanowire Networks for Li-ion Battery Anodes.

Si/C Composite Embedded Nano-Si in 3D Porous Carbon Matrix and Enwound by Conductive CNTs As Anode of Lithium-Ion Batteries

Three-dimensional porous nano-Ni supported silicon composite film for high-performance lithium-ion batteries

Three-dimensional network of nitrogen-doped carbon matrix-encapsulated Si nanoparticles/carbon nanofibers hybrids for lithium-ion battery anodes with excellent capability

Ni–Si nanosheet network as high performance anode for Li ion batteries

Diameter Dependent Performance of Silicon Nanowire Anodes Grown on 3D Current Collectors for Lithium-ion Batteries

Application of electrodeposited Cu-metal nanoflake structures as 3D current collector in lithium-metal batteries

Ni 3Si 2-Si nanowires on Ni foam as a high-performance anode of Li-ion batteries

Tissue-like Silicon Nanowires-Based Three-Dimensional Anodes for High-Capacity Lithium Ion Batteries

Flexible Porous Silicon/Carbon Fiber Anode for High−Performance Lithium−Ion Batteries

A Lightweight 3D Cu Nanowire Network with Phosphidation Gradient as Current Collector for High‐Density Nucleation and Stable Deposition of Lithium

Nanostructured Silicon-Carbon 3D Electrode Architectures for High-Performance Lithium-Ion Batteries

Three-Dimensional Nickel Foam-Based Lithiophilic LPP-Ni3S2@Ni Current Collector for Dendrite-Free Lithium Anode

Construction of three-dimensional carbon framework-loaded silicon nanoparticles anchored by carbon film for high-performance lithium-ion battery anode materials