Tailored laser beam shapes for welding of copper using green laser radiation

Florian Kaufmann,Stephan Roth,Michael Schmidt

DOI: https://doi.org/10.1007/s00170-024-13180-z

IF: 3.563

2024-02-10

The International Journal of Advanced Manufacturing Technology

Abstract:The rapid development of laser beam sources and adapted welding technologies in recent years lead to an increased use of laser welding techniques in automated production nowadays. Especially its precision and local energy input are key features for joining applications in electric vehicle components, where joints have to meet both mechanical and electrical requirements as current-carrying connections. However, the copper materials used are difficult to weld due to their physical properties, making a stable process with fewest seam imperfections only feasible within a limited process window. Recently available beam sources emitting visible laser radiation have proven to overcome the low absorptivity at process start, but spattering is still a prone defect significantly affecting process efficiency and quality. Literature approaches for modifying the energy input point to laser beam shaping as a method for reducing process imperfections, which, however, has not been extensively researched in copper processing using green laser radiation.

engineering, manufacturing,automation & control systems

What problem does this paper attempt to address?

The paper mainly explores the issue of improving welding quality and process stability in the laser welding of copper materials by using specifically shaped laser beams (particularly green laser radiation).

### Research Background and Objectives

- **Research Background**: With the development of emerging technologies such as electric vehicles, the demand for copper materials has increased. However, due to its physical properties (such as high thermal conductivity and low melting viscosity), copper presents certain challenges in laser welding. Especially when using near-infrared laser sources, the absorption rate of copper is relatively low, making the welding process difficult to stabilize and prone to defects.
- **Research Objectives**: This paper aims to expand the process window for laser welding of copper materials, improve welding efficiency, and reduce defect formation by using specifically shaped green laser beams (wavelength of 515 nm). Specifically, the research focuses on how changing the shape of the laser beam affects the dynamics of the molten pool and the behavior of the vapor hole, thereby reducing spatter in deep penetration welding and improving weld shape.

### Main Research Content

- **Experimental Design**: The study employed a customized welding optical system capable of generating two different shapes of laser beams: Top Hat and elliptical. Experimental parameters included laser power, welding speed, etc., and the welding process was recorded using high-speed imaging.
- **Results Analysis**: Through observation of the welding process and microstructural analysis of the welds, it was found that using specifically shaped laser beams can expand the thermal conduction welding area, improve weld shape, and reduce spatter in deep penetration welding mode. In particular, the elliptical laser beam helps reduce spatter formation, which is related to the oscillatory motion of the vapor hole.

In summary, the main purpose of this paper is to explore how to optimize the laser welding process of copper materials by adjusting the shape of the laser beam to achieve better welding results.